Delve into the world of built-in app and system services available to developers. Discuss leveraging these services to enhance your app's functionality and user experience.

Posts under General subtopic

Post

Replies

Boosts

Views

Activity

Can a Family Controls app sync a derived daily score to a server?
An app using FamilyControls (.individual) computes a single daily number on device from the user's own DeviceActivity data. Can that number be sent to a server so the user can compare it with friends? No app tokens, bundle IDs, or per-app times would leave the device. Is this allowed under DPLA section 3.3.3(P), which limits sharing usage data "beyond … the individual and their device"?
0
1
233
Oct ’26
Request: Higher-Frequency IMU Access on Apple Watch for Sports Performance Apps
Hi everyone, I’m building a sports performance app for Apple Watch that uses the onboard IMU to analyze swings and impacts in sports like tennis and golf. The goal is to estimate club/racket head speed, ball speed, and shot quality in real time from wrist motion data. With Core Motion, I can currently get deviceMotion updates at ~100 Hz. While this is fine for general movement tracking, the actual ball impact happens much faster — 5–10 ms in tennis and ~0.5 ms in golf. Many of the high-frequency vibration/impact components are missed at 100 Hz, making it hard to directly measure or more accurately estimate certain performance metrics. Questions for Apple / community: 1. Is there a way to access raw accelerometer and gyroscope data at higher sampling rates (e.g., 500–1000 Hz) on Apple Watch? 2. If not, is this due to hardware limitations or an API/software constraint? 3. Are there any research, partner, or beta programs that allow deeper sensor access for sports-science use cases? Even modest increases in IMU sampling could unlock more accurate ball-speed estimates, impact force analysis, and strike-quality detection without needing external sensors — making Apple Watch a best-in-class wearable for precision sports analytics. Happy to share more about the current approach, sample data, and potential use cases if helpful. Thanks, Max
2
0
1.4k
Oct ’26
watchOS CallKit calls: no DTMF keypad, no audio-route picker, no Recents — are these system-gated for third-party providers?
Hi all, I'm building a watchOS VoIP app that places and receives calls through CallKit, with call audio staying on the watch (not routed to the paired iPhone). Calls connect and audio works. But three parts of the system in-call UI that the native Phone app shows never appear for my app, and I'd like to confirm whether this is expected or a misconfiguration on my side. Environment watchOS 26.0, Apple Watch 11 (reproduced on a physical device) Xcode 27.1 Companion watchOS app, calls driven by CXProvider / CXCallController What's missing during an active call No DTMF keypad. The user can't open a keypad from the system call screen, so in-call DTMF (e.g. navigating an IVR) is impossible. No audio-route picker. No control to switch output route (e.g. speaker vs. the default route). No entry in Recents. Completed calls don't appear in the watch's call history. The system call UI is full-screen and in front, so I also can't present my own keypad or route control on top of it. What I've already tried (all public API) // Reported call callUpdate.supportsDTMF = true // Provider configuration config.includesCallsInRecents = true config.supportedHandleTypes = [.phoneNumber] config.maximumCallGroups = 1 // Audio session: route changes programmatically, but adds no user-facing picker try session.setCategory(.playAndRecord, mode: .voiceChat) try session.overrideOutputAudioPort(.speaker) // Never invoked — no keypad exists to generate the action func provider(_ provider: CXProvider, perform action: CXPlayDTMFCallAction) { ... } None of these make the keypad, the route picker, or a Recents entry appear. The behavior is identical regardless of these values, which makes me suspect these controls are exposed only for the native telephony/relay call path, not for third-party CXProvider calls on the watch. Questions Are the in-call DTMF keypad, audio-route picker, and Recents entry available to third-party CXProvider calls on standalone watchOS at all, or are they reserved for the system (relayed cellular / FaceTime) call UI? If not, is there a supported way to present my own keypad or route control during an active CallKit call, given the system call UI is in front? Thanks!
1
0
738
Oct ’26
Supported way to return the user to the app they chose after a pause screen (App Intent from an "App is Opened" automation)
We're building a Screen Time / mindful-pause app for iOS 26–27. The user adds a Shortcuts personal automation "When is Opened" that runs our App Intent. The intent passes the trigger app's Bundle Identifier (from the trigger output) and shows a short pause screen. When the user taps "Continue", we want to take them back into that app — only the one app they chose, only after they tap. Is there a supported API to open another installed app when the user taps Continue, given its bundle identifier from the Shortcuts trigger? A DTS reply in 2024 said there was no supported way (thread 740707). Has anything changed in iOS 26/27? (Related feedback: FB15500695.) If not, is it acceptable to open the chosen app via a URL scheme it registers in its Info.plist, including a third-party sign-in callback scheme, purely to bring it to the foreground? Many apps register no URL scheme. Is there a recommended pattern — e.g. handing control back to Shortcuts so the automation or the "Open App" action opens the trigger app — without the "App is Opened" automation firing again in a loop? What's the recommended way to avoid that re-fire? We currently ignore it for a short time window. A minimal sample project reproduces this (App Intent, pause screen, Continue using UIApplication.open). Happy to share it. Xcode 27.0 (27A266a), iOS 27.0 (24A446).
0
0
205
Oct ’26
Has the iOS system adapted to the time zone policy of British Columbia, Canada?
Has the iOS system adapted to the time zone policy of British Columbia, Canada? If the iPhone's system time zone is set to America/Edmonton, what result should the code below return after adapting? [[NSTimeZone systemTimeZone] isDaylightSavingTime] [[NSTimeZone systemTimeZone] secondsFromGMT] [[NSTimeZone systemTimeZone] daylightSavingTimeOffset]
1
0
226
Oct ’26
Connection problems between Xcode and Apple Watch
Hello! As I try to use Xcode (has happened in versions 16 and 26) and my Apple Watch (has happened with Series 6 and 10), the Devices and Simulators window reports problems connecting to the Watch. Messages vary from "Connecting to Apple Watch" to "Waiting to reconnect: Previous preparation error: the tunnel connection failed while the system tried to connect to the device; client unable to receive tunnel handshake response", or "Apple Watch may need to be unlocked to recover from previously reported preparation errors. Ensure the device is unlocked and near this Mac for better connection quality." The Watch was operational, and on my wrist, so it was unlocked. Any suggestions on how to move beyond this? Thank you!
7
2
989
Oct ’26
Can CXCallObserver detect missed cellular calls while an iOS app is suspended?
Hello, I am developing an iPhone application to help users avoid missing important phone calls. The intended behavior is: A user receives a regular cellular call through the built-in iPhone Phone app. The user does not answer the call. Our application automatically detects the missed call. The application schedules repeated local notifications until the user acknowledges the missed call. The critical requirement is that detection must work while our application is in the background, without the user reopening it. Implementation We currently use CXCallObserver to observe cellular call events. When an incoming call ends without being connected, we classify it as a missed call and schedule notifications using UNUserNotificationCenter. Test environment Device: iPhone 17 iOS: 26.7.1 Distribution target: Standard App Store, Japan Testing: Physical device without an attached Xcode debugger Observed behavior Scenario A: Our application is visible immediately before the iPhone is locked. Missed calls have been detected and notifications scheduled after more than 30 to 60 minutes of device lock. Scenario B: Our application is moved to the background before the iPhone is locked, for example by returning to the Home Screen or opening Safari. Missed calls are not detected promptly, even after only a short period in the background. When the user subsequently opens our application, CXCallObserver callbacks may arrive and the earlier missed call is then detected. This defeats the purpose of the application because the user must reopen it to receive alerts. Questions Is CXCallObserver expected to deliver callbacks while its application is suspended, or only when the process is executing? Is there any supported public iOS API, extension, or background execution mechanism that allows a third-party application to detect missed calls from the built-in Phone app while the application is suspended or terminated? Can a regular cellular missed-call event wake or relaunch a third-party application? If CXCallObserver cannot support this use case, is there another Apple-supported solution available to ordinary App Store applications distributed in Japan? We are looking for an approach that does not require external hardware, carrier integration, private APIs, or unsupported background execution techniques. If this use case is not supported by the public iOS SDK, confirmation of that limitation would be very helpful. Thank you for your guidance.
1
0
359
Oct ’26
MFMailComposeViewController in visionOS does not have a cancel button
When i use the MFMailComposeViewController in visionOS, there is no cancel button for the controller. The button at the bottom closes the app. Is anyone else experiencing this? if([MFMailComposeViewController canSendMail]) { MFMailComposeViewController* controller = [[MFMailComposeViewController alloc] init]; controller.mailComposeDelegate = (id <MFMailComposeViewControllerDelegate>)view; [controller setToRecipients:toAddresses]; [controller setSubject:subject]; [controller setMessageBody:body isHTML:isHtml]; [view presentViewController:controller animated:YES completion:nil]; }
15
1
2.1k
Oct ’26
What's the best way to get symbol files for system libraries, for symbolicating MetricKit call stack trees?
I wrote a python script MXSymbolicate to symbolicate crash reports produced by MetricKit. To symbolicate a given frame, it needs the symbol file for that frame's library. For system libraries, my system only has the requisite files on disk if I've plugged an iOS device of that type at that iOS version into my computer at some point (I assume these symbol files from the device are generated by Xcode when it's preparing to debug on a new device). All these different versions of the symbol files take up a fair bit of space on my machine over time, and it means the symbolication process isn't very portable. Is there a better way to get ahold of symbol files for system libraries? Or is the expectation that we (as third party developers) only symbolicate the frames from our own apps?
3
0
292
Oct ’26
Supported way to display a nonsensitive clock off wrist, unplugged, with wrist detection enabled
I am developing a watch-only bedside clock for an Apple Watch running watchOS 27.0.1. The user needs to remove the watch in hot weather and still see the time without having a charger available. The requirements are: wrist detection remains enabled; the watch is off wrist and unplugged; the app is opened manually on the watch; the clock remains visible without periodic touches or any Mac/developer connection. Covering the screen should turn it off. The UI contains only the time, date, and battery level. It does not need protected data, HealthKit access, or programmatic unlocking. Independent physical testing still ends in the app transitioning to the background and the display turning off. Always On configuration and background runtime are not sufficient in the tested off-wrist state. Experimental idle-display requests either have no visible effect or extend the visible period to approximately 60 seconds. Updating the native scene's requested idle duration every 20 seconds does not renew the observed display deadline, despite the local readback showing the requested values. Is there a supported public API or system-owned presentation surface that can keep a nonsensitive clock visible in this situation while preserving wrist detection and authentication? If this requires an approved entitlement or a platform capability, is one available to third-party developers for this use case? Please distinguish keeping the process alive, retaining the frontmost app, and keeping the physical display visible after removal from the wrist. I have not claimed additional entitlements or changed the watch's authentication settings. I would appreciate clarification of the supported platform boundary before undertaking further device experiments.
0
0
263
Oct ’26
DeviceActivityMonitor: increase memory limit from 6MB
Dear Screen Time Team! The current 6 MB memory limit for the DeviceActivityMonitor extension no longer reflects the reality of modern iOS devices or the complexity of apps built on top of the Screen Time framework. When Screen Time APIs were introduced with iOS 15, hardware constraints were very different. Since then, iPhone performance and available RAM have increased significantly…but the extension memory limit has remained unchanged. My name is Frederik Riedel, and I’m the developer of the screen time app “one sec.” Our app relies heavily on FamilyControls, ManagedSettings, and DeviceActivity to provide real-time interventions that help users reduce social media usage. In practice, the 6 MB limit has become a critical bottleneck: The DeviceActivityMonitor extension frequently crashes due to memory pressure, often unpredictably. Even highly optimized implementations struggle to stay within this constraint when using Swift and multiple ManagedSettings stores. The limit makes it disproportionately difficult to build stable, maintainable, and scalable architectures on top of these frameworks. This is not just an edge case…it directly impacts reliability in production apps that depend on Screen Time APIs for core functionality. Modern system integrations like Screen Time are incredibly powerful, but they also require a reasonable amount of memory headroom to function reliably. The current limit forces developers into fragile workarounds and undermines the robustness of apps that aim to improve users’ digital wellbeing. We would greatly appreciate if you could revisit and update this restriction to better align with today’s device capabilities and developer needs. Thank you for your continued work on Screen Time and for supporting developers building meaningful experiences on top of it. Feedback: FB22279215 Best regards, Frederik Riedel (one sec app)
6
6
816
Oct ’26
Apple Watch Ultra: Does an underwater compass app require the full Submerged Depth and Pressure entitlement to operate below 6 meters?
Hi there, I'm planning to develop a simple underwater compass app for Apple Watch Ultra 2, intended for recreational scuba diving down to 40 meters. The app itself does not need depth or pressure measurements beyond 6 meters. Its primary function is compass navigation using heading data. During a dive, however, I would like the app to: remain frontmost and visible throughout the dive; use Water Lock; use an underwater-depth WKExtendedRuntimeSession; continue receiving compass heading updates; allow interaction through physical controls such as the Digital Crown and Action Button; remain operational below 6 meters, potentially down to 40 meters. I understand that the Shallow Depth and Pressure capability limits CMWaterSubmersionManager depth/pressure data to approximately 6 meters, while access to depth/pressure data down to 40 meters requires the full Submerged Depth and Pressure entitlement. My question is: If my app does not require depth/pressure measurements beyond 6 meters, is the full Submerged Depth and Pressure entitlement still required simply to keep the underwater extended runtime session, UI, compass heading updates, and physical-control interaction working below 6 meters? In other words, does the 6-meter entitlement limit apply only to depth/pressure data, or does it also limit the ability of an underwater compass app to remain operational during a scuba dive below 6 meters? Target hardware: Apple Watch Ultra 2. Thanks in advance!
5
0
730
Oct ’26
Managed Background Assets: Version Resolution & Compatibility
Hello, We are developing a macOS app using Apple-Hosted Managed Background Assets (MBA). Our resources are strictly coupled to specific app binary versions (e.g., App v1.0 is incompatible with Asset Pack v2.0 due to data schema and data format changes). We plan to use Essential asset packs, but also plan to provide an in-app fallback using ensureLocalAvailability during initial launch to handle cases where background downloads fail or are delayed. We have questions regarding the version-resolution behavior and Apple's recommended architecture for version-coupled assets. Scenario A user installs App v1.0 (which targets Asset v1.0). The initial Essential download fails (e.g., network disconnect). The user opens the app without local assets. Later, Asset v2.0 is released to the App Store alongside App v2.0. The user on App v1.0 launches the app and calls ensureLocalAvailability. Questions [1] Version Resolution & Fallback Behavior When an app has no local asset pack installed and calls: try await AssetPackManager.shared.ensureLocalAvailability( of: appResources01, requireLatestVersion: false // or the legacy ensureLocalAvailability(of:) ) Does the system always fetch the latest live version in the App Store (v2.0), or is there any mechanism to retrieve the historical version compatible with App v1.0? Is it possible for an app to explicitly request a specific Asset Pack version rather than the currently active App Store version? [2] Scope of shouldDownload(_:) Does ManagedDownloaderExtension.shouldDownload(_:) get invoked during an explicit in-app call to ensureLocalAvailability? Or is shouldDownload(_:) exclusively called for system-initiated background download cycles? [3] Recommended Architecture for Version-Coupled Resources If an application cannot maintain backward compatibility within a single continuously versioned Asset Pack (v1 → v2 → v3), what is Apple's recommended design pattern? Option A (Separate Identifiers): Define distinct Asset Pack identifiers for each incompatible app generation (e.g., AppResources-v1, AppResources-v2)? Option B (Forced App Update): Use a single Asset Pack identifier and require older app versions to prompt a forced app update via the Mac App Store if assets are missing and incompatible? Option C: Is there another recommended mechanism within Background Assets for managing strict asset-binary version coupling? Thank you for your guidance!
1
0
165
Oct ’26
How can I get the top right aligned transaction amount in iOS spotlight like how Wallet has things setup?
iOS 27, See image below. From top to bottom I'm using: displayName containerDisplayName contentDescription I haven't found a way to remove the transaction amount from my containerDisplayName and display it in the top right with some other CSSearchableItemAttributeSet value. Is it even possible?
1
0
557
Oct ’26
Is there any official way for a Screen Time app outside the EU to access per-app usage data?
I'm developing a digital wellbeing app using FamilyControls and DeviceActivity. The core functionality of the app is to show the user their per-application Screen Time usage, including the application identity and duration (for example, Instagram — 1h 30m, YouTube — 45m). I understand that on iOS 26.4+, AuthorizationStatus.approvedWithDataAccess and DeviceActivityData.activityData(filteredBy:using:) provide access to non-tokenized application usage data. I also understand the current Apple documentation states that customer installations can only obtain approvedWithDataAccess on devices located in the EU with an Apple Account configured to an EU country or region, and that outside the EU the authorization status never becomes approvedWithDataAccess. My app and test device are based in Kazakhstan. My question is not about bypassing Apple's privacy model or implementing an undocumented workaround. I would like to know whether there is any official path for a legitimate third-party Screen Time / digital wellbeing app to obtain this data outside the EU, for example: an additional entitlement; a developer approval or application process; a regional exception; an alternative Apple-supported API; or any other official mechanism. We already have the Family Controls distribution entitlement approved and have enabled the Family Controls App and Website Usage capability. If no such mechanism exists, I would appreciate confirmation that the EU restriction is currently absolute for customer installations and that there is no additional entitlement or approval process available for developers outside the EU. The reason I am asking is that per-application usage is a core part of the application's functionality, so I want to make sure I am not missing an official Apple-supported option before designing around this limitation.
0
1
178
Oct ’26
Declared Age Range and consent revocation in an entirely offline iPhone app
We are implementing regional age-assurance checks for an iPhone app that supports iOS 17 and later. It is a paid toddler app with no backend, app accounts, ads, in-app purchases, messaging or shared user content. All content is suitable for young children. Optional family voice recordings remain on the device. We plan to request Declared Age Range when Apple's regulatory signals require it, process the response locally, and avoid logging, storing or transmitting age data. We are seeking supported technical behavior, rather than legal advice or preapproval: What supported API or platform guarantee establishes that initial download/purchase parental consent was obtained? The age-range response does not appear to expose a separate initial-consent status. Apple's age-assurance Q&A says the platform prevents launching an app after a parent revokes consent. The implementation guidance also describes RESCIND_CONSENT through App Store Server Notifications. For an app with no backend or remotely accessible service, can local access rely on the platform's launch blocking, or is a notification server still required? If a server is required, what local enforcement behavior should it drive? What is the supported behavior for offline reopening and unavailable or network-error results, particularly on older supported iOS versions where the regulatory APIs are unavailable? Does platform enforcement also cover an app already running when consent is revoked, and how should an offline app handle that transition? Documentation or a sample showing this entirely local case would be helpful.
0
0
414
Oct ’26
Screen Time issues after transferring App developer account ownership
After transferring the App ownership to a different account, if you update the app on iOS, two identical apps will show up in Settings > Screen Time. Users can't control the blocking settings from before the update - the only fix is to restart the phone. After the next execution of manageStore.shield.applications, users still can't manually disable the restrictions - their only option is to uninstall and reinstall the app. I believe this is related to how Screen Time API's authentication works - it's not just tied to the app's bundle ID, but also linked to the developer account's organization ID. Any suggestions for a clean solution that would allow smooth app updates after the transfer without running into these issues?
4
3
929
Oct ’26
Universal Links: Source countries or IP ranges used to retrieve AASA file
I’m looking for clarification on how Apple retrieves the apple-app-site-association (AASA) file for Universal Links / Associated Domains. Assume a domain exposes the AASA file at: https://example.com/.well-known/apple-app-site-association The domain is protected by Geo-Blocking, where access from certain countries/regions is restricted. I would like to understand the expected network behavior for AASA retrieval: Can requests to retrieve the AASA file originate from Apple infrastructure in different countries or regions globally? Does Apple publish a list of source countries, IP addresses, IP ranges, or network ranges specifically used for AASA retrieval? Can the source country or IP address change over time due to Apple's infrastructure, CDN, or routing? Is there any supported way to force AASA retrieval through a particular region, such as the US? If certain countries are blocked, is there any way to determine whether Apple may use infrastructure from those countries for AASA retrieval? Is the recommended approach to allow the following endpoint to be publicly reachable regardless of source geography? The objective is to restrict access as much as possible while ensuring that Universal Links continue to work reliably. If there is any official Apple documentation covering the source network, IP ranges, geographic locations, or accessibility requirements for AASA retrieval, a reference would be greatly appreciated.
1
0
356
Oct ’26
Family Controls / DeviceActivity: Can an on-device usage result be shared as an abstract score or goal-completion event?
I’m evaluating an iOS app that uses Family Controls / DeviceActivity for an adult user’s voluntary personal device-management and digital-wellbeing goals. The app would also have an optional social competition feature where friends participate in fantasy-style leagues based on completion of their individual digital-wellbeing goals. I’m trying to understand the restrictions in Apple Developer Program License Agreement Section 3.3.3(P), specifically whether a privacy-preserving result derived locally from Family Controls / DeviceActivity can leave the device when the underlying usage data never does. I’m considering three architectures: A — Locally derived fantasy score DeviceActivity information is evaluated entirely on-device and converted locally into an abstract score. The server receives only: fantasy_points = 82 No Screen Time duration, app identity, website activity, bundle identifier, or underlying usage information leaves the device. B — Binary goal completion A user creates a private usage goal, such as remaining below their chosen daily device-usage threshold. The goal is evaluated entirely on-device. The server receives only: goal_completed = true The server then awards predetermined fantasy points. It never receives the underlying Screen Time value. C — Opaque challenge completion A user privately selects an app/activity goal. DeviceActivity evaluates the threshold locally. The server receives only: challenge_id = C928 completed = true The server knows C928 is worth a predetermined number of points, but does not receive the selected app identity, usage duration, Screen Time quantity, or other underlying DeviceActivity information. In all three approaches, raw Screen Time duration, per-app usage duration, application/bundle identity, website activity, DeviceActivity reports, and underlying historical usage records would remain on-device. Friends would only see fantasy points, matchup results, standings, and/or achievements. My question: Under Section 3.3.3(P) and the Family Controls requirements, are any of A, B, or C permitted? More specifically, does Apple consider an abstract score, boolean goal-completion result, or opaque challenge-completion result to itself be “device or usage data” when it was derived from Family Controls / DeviceActivity? If none of these architectures are permitted, is there a supported privacy-preserving architecture that allows an on-device DeviceActivity evaluation to affect a server-side social or multiplayer feature without transmitting the underlying device/usage information? I’m trying to establish the compliant architecture before development rather than build around an incorrect interpretation of the Family Controls requirements.
0
1
337
Sep ’26
Supported way to test Family Controls .child authorization without using a child's personal account?
I'm developing an iOS parent-child app that uses FamilyControls and DeviceActivity. Before distribution, I need to test AuthorizationCenter.shared.requestAuthorization(for: .child), including the guardian approval flow. So far I have tested .individual, which authenticates the device owner and does not exercise the child flow. Apple Developer Program Support directed me to this forum. What is the Apple-supported way to test this flow in this situation? Is there an Apple-supported test-only account or setup for this flow without using a child's personal Apple Account? If so, where are its requirements documented? If not, what is the recommended alternative? Can Sandbox Apple Accounts used for StoreKit Family Sharing tests be used to sign in to iCloud and test FamilyControls .child, or are they limited to purchase testing? Is there a supported simulator or other test method for guardian approval, or must this be verified using a child Apple Account in a real Family Sharing group on physical devices? I want to follow Apple's account rules and test the actual parental authorization path before distribution. References to official guidance would be appreciated.
0
0
123
Sep ’26
Can a Family Controls app sync a derived daily score to a server?
An app using FamilyControls (.individual) computes a single daily number on device from the user's own DeviceActivity data. Can that number be sent to a server so the user can compare it with friends? No app tokens, bundle IDs, or per-app times would leave the device. Is this allowed under DPLA section 3.3.3(P), which limits sharing usage data "beyond … the individual and their device"?
Replies
0
Boosts
1
Views
233
Activity
Oct ’26
Request: Higher-Frequency IMU Access on Apple Watch for Sports Performance Apps
Hi everyone, I’m building a sports performance app for Apple Watch that uses the onboard IMU to analyze swings and impacts in sports like tennis and golf. The goal is to estimate club/racket head speed, ball speed, and shot quality in real time from wrist motion data. With Core Motion, I can currently get deviceMotion updates at ~100 Hz. While this is fine for general movement tracking, the actual ball impact happens much faster — 5–10 ms in tennis and ~0.5 ms in golf. Many of the high-frequency vibration/impact components are missed at 100 Hz, making it hard to directly measure or more accurately estimate certain performance metrics. Questions for Apple / community: 1. Is there a way to access raw accelerometer and gyroscope data at higher sampling rates (e.g., 500–1000 Hz) on Apple Watch? 2. If not, is this due to hardware limitations or an API/software constraint? 3. Are there any research, partner, or beta programs that allow deeper sensor access for sports-science use cases? Even modest increases in IMU sampling could unlock more accurate ball-speed estimates, impact force analysis, and strike-quality detection without needing external sensors — making Apple Watch a best-in-class wearable for precision sports analytics. Happy to share more about the current approach, sample data, and potential use cases if helpful. Thanks, Max
Replies
2
Boosts
0
Views
1.4k
Activity
Oct ’26
watchOS CallKit calls: no DTMF keypad, no audio-route picker, no Recents — are these system-gated for third-party providers?
Hi all, I'm building a watchOS VoIP app that places and receives calls through CallKit, with call audio staying on the watch (not routed to the paired iPhone). Calls connect and audio works. But three parts of the system in-call UI that the native Phone app shows never appear for my app, and I'd like to confirm whether this is expected or a misconfiguration on my side. Environment watchOS 26.0, Apple Watch 11 (reproduced on a physical device) Xcode 27.1 Companion watchOS app, calls driven by CXProvider / CXCallController What's missing during an active call No DTMF keypad. The user can't open a keypad from the system call screen, so in-call DTMF (e.g. navigating an IVR) is impossible. No audio-route picker. No control to switch output route (e.g. speaker vs. the default route). No entry in Recents. Completed calls don't appear in the watch's call history. The system call UI is full-screen and in front, so I also can't present my own keypad or route control on top of it. What I've already tried (all public API) // Reported call callUpdate.supportsDTMF = true // Provider configuration config.includesCallsInRecents = true config.supportedHandleTypes = [.phoneNumber] config.maximumCallGroups = 1 // Audio session: route changes programmatically, but adds no user-facing picker try session.setCategory(.playAndRecord, mode: .voiceChat) try session.overrideOutputAudioPort(.speaker) // Never invoked — no keypad exists to generate the action func provider(_ provider: CXProvider, perform action: CXPlayDTMFCallAction) { ... } None of these make the keypad, the route picker, or a Recents entry appear. The behavior is identical regardless of these values, which makes me suspect these controls are exposed only for the native telephony/relay call path, not for third-party CXProvider calls on the watch. Questions Are the in-call DTMF keypad, audio-route picker, and Recents entry available to third-party CXProvider calls on standalone watchOS at all, or are they reserved for the system (relayed cellular / FaceTime) call UI? If not, is there a supported way to present my own keypad or route control during an active CallKit call, given the system call UI is in front? Thanks!
Replies
1
Boosts
0
Views
738
Activity
Oct ’26
Supported way to return the user to the app they chose after a pause screen (App Intent from an "App is Opened" automation)
We're building a Screen Time / mindful-pause app for iOS 26–27. The user adds a Shortcuts personal automation "When is Opened" that runs our App Intent. The intent passes the trigger app's Bundle Identifier (from the trigger output) and shows a short pause screen. When the user taps "Continue", we want to take them back into that app — only the one app they chose, only after they tap. Is there a supported API to open another installed app when the user taps Continue, given its bundle identifier from the Shortcuts trigger? A DTS reply in 2024 said there was no supported way (thread 740707). Has anything changed in iOS 26/27? (Related feedback: FB15500695.) If not, is it acceptable to open the chosen app via a URL scheme it registers in its Info.plist, including a third-party sign-in callback scheme, purely to bring it to the foreground? Many apps register no URL scheme. Is there a recommended pattern — e.g. handing control back to Shortcuts so the automation or the "Open App" action opens the trigger app — without the "App is Opened" automation firing again in a loop? What's the recommended way to avoid that re-fire? We currently ignore it for a short time window. A minimal sample project reproduces this (App Intent, pause screen, Continue using UIApplication.open). Happy to share it. Xcode 27.0 (27A266a), iOS 27.0 (24A446).
Replies
0
Boosts
0
Views
205
Activity
Oct ’26
Has the iOS system adapted to the time zone policy of British Columbia, Canada?
Has the iOS system adapted to the time zone policy of British Columbia, Canada? If the iPhone's system time zone is set to America/Edmonton, what result should the code below return after adapting? [[NSTimeZone systemTimeZone] isDaylightSavingTime] [[NSTimeZone systemTimeZone] secondsFromGMT] [[NSTimeZone systemTimeZone] daylightSavingTimeOffset]
Replies
1
Boosts
0
Views
226
Activity
Oct ’26
Connection problems between Xcode and Apple Watch
Hello! As I try to use Xcode (has happened in versions 16 and 26) and my Apple Watch (has happened with Series 6 and 10), the Devices and Simulators window reports problems connecting to the Watch. Messages vary from "Connecting to Apple Watch" to "Waiting to reconnect: Previous preparation error: the tunnel connection failed while the system tried to connect to the device; client unable to receive tunnel handshake response", or "Apple Watch may need to be unlocked to recover from previously reported preparation errors. Ensure the device is unlocked and near this Mac for better connection quality." The Watch was operational, and on my wrist, so it was unlocked. Any suggestions on how to move beyond this? Thank you!
Replies
7
Boosts
2
Views
989
Activity
Oct ’26
Can CXCallObserver detect missed cellular calls while an iOS app is suspended?
Hello, I am developing an iPhone application to help users avoid missing important phone calls. The intended behavior is: A user receives a regular cellular call through the built-in iPhone Phone app. The user does not answer the call. Our application automatically detects the missed call. The application schedules repeated local notifications until the user acknowledges the missed call. The critical requirement is that detection must work while our application is in the background, without the user reopening it. Implementation We currently use CXCallObserver to observe cellular call events. When an incoming call ends without being connected, we classify it as a missed call and schedule notifications using UNUserNotificationCenter. Test environment Device: iPhone 17 iOS: 26.7.1 Distribution target: Standard App Store, Japan Testing: Physical device without an attached Xcode debugger Observed behavior Scenario A: Our application is visible immediately before the iPhone is locked. Missed calls have been detected and notifications scheduled after more than 30 to 60 minutes of device lock. Scenario B: Our application is moved to the background before the iPhone is locked, for example by returning to the Home Screen or opening Safari. Missed calls are not detected promptly, even after only a short period in the background. When the user subsequently opens our application, CXCallObserver callbacks may arrive and the earlier missed call is then detected. This defeats the purpose of the application because the user must reopen it to receive alerts. Questions Is CXCallObserver expected to deliver callbacks while its application is suspended, or only when the process is executing? Is there any supported public iOS API, extension, or background execution mechanism that allows a third-party application to detect missed calls from the built-in Phone app while the application is suspended or terminated? Can a regular cellular missed-call event wake or relaunch a third-party application? If CXCallObserver cannot support this use case, is there another Apple-supported solution available to ordinary App Store applications distributed in Japan? We are looking for an approach that does not require external hardware, carrier integration, private APIs, or unsupported background execution techniques. If this use case is not supported by the public iOS SDK, confirmation of that limitation would be very helpful. Thank you for your guidance.
Replies
1
Boosts
0
Views
359
Activity
Oct ’26
MFMailComposeViewController in visionOS does not have a cancel button
When i use the MFMailComposeViewController in visionOS, there is no cancel button for the controller. The button at the bottom closes the app. Is anyone else experiencing this? if([MFMailComposeViewController canSendMail]) { MFMailComposeViewController* controller = [[MFMailComposeViewController alloc] init]; controller.mailComposeDelegate = (id <MFMailComposeViewControllerDelegate>)view; [controller setToRecipients:toAddresses]; [controller setSubject:subject]; [controller setMessageBody:body isHTML:isHtml]; [view presentViewController:controller animated:YES completion:nil]; }
Replies
15
Boosts
1
Views
2.1k
Activity
Oct ’26
What's the best way to get symbol files for system libraries, for symbolicating MetricKit call stack trees?
I wrote a python script MXSymbolicate to symbolicate crash reports produced by MetricKit. To symbolicate a given frame, it needs the symbol file for that frame's library. For system libraries, my system only has the requisite files on disk if I've plugged an iOS device of that type at that iOS version into my computer at some point (I assume these symbol files from the device are generated by Xcode when it's preparing to debug on a new device). All these different versions of the symbol files take up a fair bit of space on my machine over time, and it means the symbolication process isn't very portable. Is there a better way to get ahold of symbol files for system libraries? Or is the expectation that we (as third party developers) only symbolicate the frames from our own apps?
Replies
3
Boosts
0
Views
292
Activity
Oct ’26
Supported way to display a nonsensitive clock off wrist, unplugged, with wrist detection enabled
I am developing a watch-only bedside clock for an Apple Watch running watchOS 27.0.1. The user needs to remove the watch in hot weather and still see the time without having a charger available. The requirements are: wrist detection remains enabled; the watch is off wrist and unplugged; the app is opened manually on the watch; the clock remains visible without periodic touches or any Mac/developer connection. Covering the screen should turn it off. The UI contains only the time, date, and battery level. It does not need protected data, HealthKit access, or programmatic unlocking. Independent physical testing still ends in the app transitioning to the background and the display turning off. Always On configuration and background runtime are not sufficient in the tested off-wrist state. Experimental idle-display requests either have no visible effect or extend the visible period to approximately 60 seconds. Updating the native scene's requested idle duration every 20 seconds does not renew the observed display deadline, despite the local readback showing the requested values. Is there a supported public API or system-owned presentation surface that can keep a nonsensitive clock visible in this situation while preserving wrist detection and authentication? If this requires an approved entitlement or a platform capability, is one available to third-party developers for this use case? Please distinguish keeping the process alive, retaining the frontmost app, and keeping the physical display visible after removal from the wrist. I have not claimed additional entitlements or changed the watch's authentication settings. I would appreciate clarification of the supported platform boundary before undertaking further device experiments.
Replies
0
Boosts
0
Views
263
Activity
Oct ’26
DeviceActivityMonitor: increase memory limit from 6MB
Dear Screen Time Team! The current 6 MB memory limit for the DeviceActivityMonitor extension no longer reflects the reality of modern iOS devices or the complexity of apps built on top of the Screen Time framework. When Screen Time APIs were introduced with iOS 15, hardware constraints were very different. Since then, iPhone performance and available RAM have increased significantly…but the extension memory limit has remained unchanged. My name is Frederik Riedel, and I’m the developer of the screen time app “one sec.” Our app relies heavily on FamilyControls, ManagedSettings, and DeviceActivity to provide real-time interventions that help users reduce social media usage. In practice, the 6 MB limit has become a critical bottleneck: The DeviceActivityMonitor extension frequently crashes due to memory pressure, often unpredictably. Even highly optimized implementations struggle to stay within this constraint when using Swift and multiple ManagedSettings stores. The limit makes it disproportionately difficult to build stable, maintainable, and scalable architectures on top of these frameworks. This is not just an edge case…it directly impacts reliability in production apps that depend on Screen Time APIs for core functionality. Modern system integrations like Screen Time are incredibly powerful, but they also require a reasonable amount of memory headroom to function reliably. The current limit forces developers into fragile workarounds and undermines the robustness of apps that aim to improve users’ digital wellbeing. We would greatly appreciate if you could revisit and update this restriction to better align with today’s device capabilities and developer needs. Thank you for your continued work on Screen Time and for supporting developers building meaningful experiences on top of it. Feedback: FB22279215 Best regards, Frederik Riedel (one sec app)
Replies
6
Boosts
6
Views
816
Activity
Oct ’26
Apple Watch Ultra: Does an underwater compass app require the full Submerged Depth and Pressure entitlement to operate below 6 meters?
Hi there, I'm planning to develop a simple underwater compass app for Apple Watch Ultra 2, intended for recreational scuba diving down to 40 meters. The app itself does not need depth or pressure measurements beyond 6 meters. Its primary function is compass navigation using heading data. During a dive, however, I would like the app to: remain frontmost and visible throughout the dive; use Water Lock; use an underwater-depth WKExtendedRuntimeSession; continue receiving compass heading updates; allow interaction through physical controls such as the Digital Crown and Action Button; remain operational below 6 meters, potentially down to 40 meters. I understand that the Shallow Depth and Pressure capability limits CMWaterSubmersionManager depth/pressure data to approximately 6 meters, while access to depth/pressure data down to 40 meters requires the full Submerged Depth and Pressure entitlement. My question is: If my app does not require depth/pressure measurements beyond 6 meters, is the full Submerged Depth and Pressure entitlement still required simply to keep the underwater extended runtime session, UI, compass heading updates, and physical-control interaction working below 6 meters? In other words, does the 6-meter entitlement limit apply only to depth/pressure data, or does it also limit the ability of an underwater compass app to remain operational during a scuba dive below 6 meters? Target hardware: Apple Watch Ultra 2. Thanks in advance!
Replies
5
Boosts
0
Views
730
Activity
Oct ’26
Managed Background Assets: Version Resolution & Compatibility
Hello, We are developing a macOS app using Apple-Hosted Managed Background Assets (MBA). Our resources are strictly coupled to specific app binary versions (e.g., App v1.0 is incompatible with Asset Pack v2.0 due to data schema and data format changes). We plan to use Essential asset packs, but also plan to provide an in-app fallback using ensureLocalAvailability during initial launch to handle cases where background downloads fail or are delayed. We have questions regarding the version-resolution behavior and Apple's recommended architecture for version-coupled assets. Scenario A user installs App v1.0 (which targets Asset v1.0). The initial Essential download fails (e.g., network disconnect). The user opens the app without local assets. Later, Asset v2.0 is released to the App Store alongside App v2.0. The user on App v1.0 launches the app and calls ensureLocalAvailability. Questions [1] Version Resolution & Fallback Behavior When an app has no local asset pack installed and calls: try await AssetPackManager.shared.ensureLocalAvailability( of: appResources01, requireLatestVersion: false // or the legacy ensureLocalAvailability(of:) ) Does the system always fetch the latest live version in the App Store (v2.0), or is there any mechanism to retrieve the historical version compatible with App v1.0? Is it possible for an app to explicitly request a specific Asset Pack version rather than the currently active App Store version? [2] Scope of shouldDownload(_:) Does ManagedDownloaderExtension.shouldDownload(_:) get invoked during an explicit in-app call to ensureLocalAvailability? Or is shouldDownload(_:) exclusively called for system-initiated background download cycles? [3] Recommended Architecture for Version-Coupled Resources If an application cannot maintain backward compatibility within a single continuously versioned Asset Pack (v1 → v2 → v3), what is Apple's recommended design pattern? Option A (Separate Identifiers): Define distinct Asset Pack identifiers for each incompatible app generation (e.g., AppResources-v1, AppResources-v2)? Option B (Forced App Update): Use a single Asset Pack identifier and require older app versions to prompt a forced app update via the Mac App Store if assets are missing and incompatible? Option C: Is there another recommended mechanism within Background Assets for managing strict asset-binary version coupling? Thank you for your guidance!
Replies
1
Boosts
0
Views
165
Activity
Oct ’26
How can I get the top right aligned transaction amount in iOS spotlight like how Wallet has things setup?
iOS 27, See image below. From top to bottom I'm using: displayName containerDisplayName contentDescription I haven't found a way to remove the transaction amount from my containerDisplayName and display it in the top right with some other CSSearchableItemAttributeSet value. Is it even possible?
Replies
1
Boosts
0
Views
557
Activity
Oct ’26
Is there any official way for a Screen Time app outside the EU to access per-app usage data?
I'm developing a digital wellbeing app using FamilyControls and DeviceActivity. The core functionality of the app is to show the user their per-application Screen Time usage, including the application identity and duration (for example, Instagram — 1h 30m, YouTube — 45m). I understand that on iOS 26.4+, AuthorizationStatus.approvedWithDataAccess and DeviceActivityData.activityData(filteredBy:using:) provide access to non-tokenized application usage data. I also understand the current Apple documentation states that customer installations can only obtain approvedWithDataAccess on devices located in the EU with an Apple Account configured to an EU country or region, and that outside the EU the authorization status never becomes approvedWithDataAccess. My app and test device are based in Kazakhstan. My question is not about bypassing Apple's privacy model or implementing an undocumented workaround. I would like to know whether there is any official path for a legitimate third-party Screen Time / digital wellbeing app to obtain this data outside the EU, for example: an additional entitlement; a developer approval or application process; a regional exception; an alternative Apple-supported API; or any other official mechanism. We already have the Family Controls distribution entitlement approved and have enabled the Family Controls App and Website Usage capability. If no such mechanism exists, I would appreciate confirmation that the EU restriction is currently absolute for customer installations and that there is no additional entitlement or approval process available for developers outside the EU. The reason I am asking is that per-application usage is a core part of the application's functionality, so I want to make sure I am not missing an official Apple-supported option before designing around this limitation.
Replies
0
Boosts
1
Views
178
Activity
Oct ’26
Declared Age Range and consent revocation in an entirely offline iPhone app
We are implementing regional age-assurance checks for an iPhone app that supports iOS 17 and later. It is a paid toddler app with no backend, app accounts, ads, in-app purchases, messaging or shared user content. All content is suitable for young children. Optional family voice recordings remain on the device. We plan to request Declared Age Range when Apple's regulatory signals require it, process the response locally, and avoid logging, storing or transmitting age data. We are seeking supported technical behavior, rather than legal advice or preapproval: What supported API or platform guarantee establishes that initial download/purchase parental consent was obtained? The age-range response does not appear to expose a separate initial-consent status. Apple's age-assurance Q&A says the platform prevents launching an app after a parent revokes consent. The implementation guidance also describes RESCIND_CONSENT through App Store Server Notifications. For an app with no backend or remotely accessible service, can local access rely on the platform's launch blocking, or is a notification server still required? If a server is required, what local enforcement behavior should it drive? What is the supported behavior for offline reopening and unavailable or network-error results, particularly on older supported iOS versions where the regulatory APIs are unavailable? Does platform enforcement also cover an app already running when consent is revoked, and how should an offline app handle that transition? Documentation or a sample showing this entirely local case would be helpful.
Replies
0
Boosts
0
Views
414
Activity
Oct ’26
Screen Time issues after transferring App developer account ownership
After transferring the App ownership to a different account, if you update the app on iOS, two identical apps will show up in Settings > Screen Time. Users can't control the blocking settings from before the update - the only fix is to restart the phone. After the next execution of manageStore.shield.applications, users still can't manually disable the restrictions - their only option is to uninstall and reinstall the app. I believe this is related to how Screen Time API's authentication works - it's not just tied to the app's bundle ID, but also linked to the developer account's organization ID. Any suggestions for a clean solution that would allow smooth app updates after the transfer without running into these issues?
Replies
4
Boosts
3
Views
929
Activity
Oct ’26
Universal Links: Source countries or IP ranges used to retrieve AASA file
I’m looking for clarification on how Apple retrieves the apple-app-site-association (AASA) file for Universal Links / Associated Domains. Assume a domain exposes the AASA file at: https://example.com/.well-known/apple-app-site-association The domain is protected by Geo-Blocking, where access from certain countries/regions is restricted. I would like to understand the expected network behavior for AASA retrieval: Can requests to retrieve the AASA file originate from Apple infrastructure in different countries or regions globally? Does Apple publish a list of source countries, IP addresses, IP ranges, or network ranges specifically used for AASA retrieval? Can the source country or IP address change over time due to Apple's infrastructure, CDN, or routing? Is there any supported way to force AASA retrieval through a particular region, such as the US? If certain countries are blocked, is there any way to determine whether Apple may use infrastructure from those countries for AASA retrieval? Is the recommended approach to allow the following endpoint to be publicly reachable regardless of source geography? The objective is to restrict access as much as possible while ensuring that Universal Links continue to work reliably. If there is any official Apple documentation covering the source network, IP ranges, geographic locations, or accessibility requirements for AASA retrieval, a reference would be greatly appreciated.
Replies
1
Boosts
0
Views
356
Activity
Oct ’26
Family Controls / DeviceActivity: Can an on-device usage result be shared as an abstract score or goal-completion event?
I’m evaluating an iOS app that uses Family Controls / DeviceActivity for an adult user’s voluntary personal device-management and digital-wellbeing goals. The app would also have an optional social competition feature where friends participate in fantasy-style leagues based on completion of their individual digital-wellbeing goals. I’m trying to understand the restrictions in Apple Developer Program License Agreement Section 3.3.3(P), specifically whether a privacy-preserving result derived locally from Family Controls / DeviceActivity can leave the device when the underlying usage data never does. I’m considering three architectures: A — Locally derived fantasy score DeviceActivity information is evaluated entirely on-device and converted locally into an abstract score. The server receives only: fantasy_points = 82 No Screen Time duration, app identity, website activity, bundle identifier, or underlying usage information leaves the device. B — Binary goal completion A user creates a private usage goal, such as remaining below their chosen daily device-usage threshold. The goal is evaluated entirely on-device. The server receives only: goal_completed = true The server then awards predetermined fantasy points. It never receives the underlying Screen Time value. C — Opaque challenge completion A user privately selects an app/activity goal. DeviceActivity evaluates the threshold locally. The server receives only: challenge_id = C928 completed = true The server knows C928 is worth a predetermined number of points, but does not receive the selected app identity, usage duration, Screen Time quantity, or other underlying DeviceActivity information. In all three approaches, raw Screen Time duration, per-app usage duration, application/bundle identity, website activity, DeviceActivity reports, and underlying historical usage records would remain on-device. Friends would only see fantasy points, matchup results, standings, and/or achievements. My question: Under Section 3.3.3(P) and the Family Controls requirements, are any of A, B, or C permitted? More specifically, does Apple consider an abstract score, boolean goal-completion result, or opaque challenge-completion result to itself be “device or usage data” when it was derived from Family Controls / DeviceActivity? If none of these architectures are permitted, is there a supported privacy-preserving architecture that allows an on-device DeviceActivity evaluation to affect a server-side social or multiplayer feature without transmitting the underlying device/usage information? I’m trying to establish the compliant architecture before development rather than build around an incorrect interpretation of the Family Controls requirements.
Replies
0
Boosts
1
Views
337
Activity
Sep ’26
Supported way to test Family Controls .child authorization without using a child's personal account?
I'm developing an iOS parent-child app that uses FamilyControls and DeviceActivity. Before distribution, I need to test AuthorizationCenter.shared.requestAuthorization(for: .child), including the guardian approval flow. So far I have tested .individual, which authenticates the device owner and does not exercise the child flow. Apple Developer Program Support directed me to this forum. What is the Apple-supported way to test this flow in this situation? Is there an Apple-supported test-only account or setup for this flow without using a child's personal Apple Account? If so, where are its requirements documented? If not, what is the recommended alternative? Can Sandbox Apple Accounts used for StoreKit Family Sharing tests be used to sign in to iCloud and test FamilyControls .child, or are they limited to purchase testing? Is there a supported simulator or other test method for guardian approval, or must this be verified using a child Apple Account in a real Family Sharing group on physical devices? I want to follow Apple's account rules and test the actual parental authorization path before distribution. References to official guidance would be appreciated.
Replies
0
Boosts
0
Views
123
Activity
Sep ’26