Explore the various UI frameworks available for building app interfaces. Discuss the use cases for different frameworks, share best practices, and get help with specific framework-related questions.

All subtopics
Posts under UI Frameworks topic

Post

Replies

Boosts

Views

Activity

iPhone Duo black bars in landscape on iOS 27.1
I am implementing support for iPhone Duo, and have seen this in many places: Apps built with the iOS 27.1 SDK or later are optimized for iPhone Duo. Apps will extend to use the full display, with toolbars and tab bars appearing vertically below the status bar. (from https://developer.apple.com/iphone-duo/prepare/) But when I build my application in Xcode 27.1, in both the simulator, and on the Duo hardware, my application is not extending to the full-width of the screen when built for iOS 27.1. There are black bars on both the left and right. When I debug the view hierarchy, I do not see the black bars, which indicates to me this is happening at the OS level, not as a result of my constraints. Note that there are no black bars in portrait mode, or on the front screen. In my project settings, only the iPhone Orientation "Portrait" is checked, but I don't want to check Landscape orientations there, because the application does not look good in landscape on a standard iPhone aspect ratio. Are those checkboxes required to remove the black bars? (Checking them does appear to do so, but again, this is quite problematic for the current design of the application.) Thanks in advance for any insights or help you can provide!
Topic: UI Frameworks SubTopic: UIKit
3
0
117
2w
No access to dictation from third-party keyboards on iPhone Duo
On a physical iPhone Duo running iOS 27.1 and later, the system dictation button is placed inside the system keyboard, next to the space bar. Because the button belongs to the system keyboard layout, it isn't available while a third-party keyboard is active. On other iPhone models, the dictation button appears separately from the keyboard, so it stays available with third-party keyboards. On iPhone Duo, our users have no way to start dictation without switching back to the system keyboard. The iPhone Duo Simulator shows the button at the far right, which doesn't match the physical device, so this can't be evaluated accurately in the Simulator. As far as I can tell, there is no public API that lets a keyboard extension start system dictation, so we can't work around this from the extension. My questions: Is this placement intended on iPhone Duo? Is there a supported way for a keyboard extension to offer dictation on this device? If not, are there plans for a separate system dictation button, as on other iPhone models, or a public API for keyboard extensions? I've filed this as FB[number]. If you develop a keyboard extension and see the same issue, please file your own report and reference this number.
1
0
137
2w
PDFView context menu: "Actual Size"
In a PDFView, the OS provides a context menu which contains (among other things) "Actual Size" zoom. This command wrongly displays the page at 1 point = 1 pixel. Traditionally on MacOS, "Actual Size" displays the page at 1 inch on page = 1 inch on screen, e.g. for a Letter page, 8.5 x 11 inches on the screen. (So the API needs to determine the display's pixel density to calculate the zoom size.) In Preview 11.0 on Os 27.2, "Actual Size" in the PDFView context menu and in the View menu both zoom to 1 point = 1 pixel. In Preview on Sequoia, Actual Size in the View menu displays at 1 inch = 1 inch, but the context menu gives 1 pt = 1px. (The latter presumably relying on the built-in context menu from PDFView.) Note that in Pages.app, Actual View gives the expected 1 inch = 1 inch on screen.
1
0
110
2w
NavigationSplitView, endless loop detail<->content
Hi, I already had a problem with the NavigationSplitView before, and I'm still working on it. The NavigationSplitView issue on the phone occurs when trying to navigate back from the detail view to the content view; the app automatically navigates straight back to the detail view. I reproduced the issue in a small program and identified the critical section. However, I do not know why the problem is occurring. I did the same thing again, but this time with @Query, and there was no problem. The categories, recipes and single recipe, all loaded by @Query and no side effects. Requirements for the content: A state variable used in the view, e.g., isLoading A task that loads the data from a ModelActor in a ViewModel, setting isLoading to true beforehand and back to false upon completion Subsequently, it is only possible to exit the detail view after many attempts, because the app immediately navigates back to the detail view automatically upon trying to leave it. One issue is changing the isLoading status variable from within the task. That in itself isn't the problem; the issue only arises when reading data via a ModelActor. If the status variable is changed and, for example, the list is modified manually, there is no problem. It only occurs when a ModelActor is used. I based it on the NavigationCookbook: This is the view I use for the content section (list): @State private var vm: RecipeListViewModel = .init() @State var isLoading: Bool = false if isLoading { ProgressView("Loading...") } else { List(selection: $selectedRecipe) { ForEach(vm.recipes) { recipe in NavigationLink(recipe.name, value: recipe) } } } .task { // bug, when used in UI, because of ModelActor isLoading = true await vm.list(context, categoryName: selectedCategory.name) isLoading = false } .task { // works, because manually modifying the list isLoading = true await vm.addRecipe(context, categoryName: selectedCategory.name) isLoading = false } inside ViewModel // bug func list(_ modelContext: ModelContext, categoryName: String) async { recipes.removeAll() let dh: RecipeDataHandler = .init(modelContainer: modelContext.container) let values = await dh.listByName(categoryName: categoryName) for v in values { recipes.append(.init(recipeId: v.recipeId, name: v.name)) } } // works func addRecipe(_ modelContext: ModelContext, categoryName: String) async { isLoading = true defer { isLoading = false } recipes.removeAll() recipes.append(.init(recipeId: "a", name: "Pambazo")) } ModelActor @ModelActor actor RecipeDataHandler { func listByName(categoryName: String) async -> [RecipeData] { var list: [RecipeData] = [] do { let fd = FetchDescriptor<Recipe>(predicate: #Predicate { $0.category.name == categoryName }, sortBy: [SortDescriptor(\Recipe.name)]) let data = try modelContext.fetch(fd) for item in data { let rec: RecipeData = await .init(recipeId: item.recipeId, name: item.name) list.append(rec) } } catch { print("error: \(error.localizedDescription)") } return list } } Recipe is a @Model and RecipeData just a struct. In principle, everything should run on the MainActor, but the inclusion of the ModelActor still leads to this strange behavior. Any idea what the problem might be? Christian
3
0
374
2w
Fundamental error in PDFOutline created syntax
PDFKit's PDFOutline creates fundamentally flawed PDF syntax when it creates outlines ("Bookmarks") in a PDF document. A PDF document is created with three outlines: "Page 1", "Page 2" and "Page 3". Each is a child of the former, so "Page 3" is a child of "Page 2", and "Page 2" is a child of "Page 1". PDFKit produces flawed PDF syntax, with duplicate entries for each bookmark, missing sibling links, and a convoluted Parent > Child relationship. 3 0 obj << /Type /Pages /Parent 45 0 R /Count 8 /Kids [ 2 0 R 6 0 R 9 0 R 12 0 R 15 0 R 18 0 R 21 0 R 24 0 R ] >> endobj 28 0 obj << /Type /Pages /Parent 45 0 R /Count 3 /Kids [ 27 0 R 31 0 R 34 0 R ] >> endobj 45 0 obj << /Type /Pages /MediaBox [0 0 612 792] /Count 11 /Kids [ 3 0 R 28 0 R ] >> endobj 46 0 obj << /Type /Catalog /Outlines 1 0 R /Pages 45 0 R >> endobj 1 0 obj << /First 47 0 R /Last 48 0 R >> endobj 48 0 obj << /Last 49 0 R /Count -1 /First 50 0 R /Title (Page 1) /Dest [ 2 0 R /XYZ 0 841.88 null ] /Parent 51 0 R >> endobj 51 0 obj << >> endobj 50 0 obj << /Last 52 0 R /Count -1 /First 53 0 R /Title (Page 2) /Dest [ 6 0 R /XYZ 0 841.88 null ] /Parent 51 0 R >> endobj 53 0 obj << /Dest [ 9 0 R /XYZ 0 841.88 null ] /Count 0 /Title (Page 3) /Parent 51 0 R >> endobj 52 0 obj << /Dest [ 9 0 R /XYZ 0 841.88 null ] /Count 0 /Title (Page 3) /Parent 51 0 R >> endobj 49 0 obj << /Last 52 0 R /Count -1 /First 53 0 R /Title (Page 2) /Dest [ 6 0 R /XYZ 0 841.88 null ] /Parent 51 0 R >> endobj 47 0 obj << /Last 49 0 R /Count -1 /First 50 0 R /Title (Page 1) /Dest [ 2 0 R /XYZ 0 841.88 null ] /Parent 51 0 R >> endobj(The Parent of all the outline objects is given as object 51, which is blank. The First/Last objects don't link correctly to the expected hierarchy, etc, etc.) Acrobat preflight will flag this as a syntax error, though the bookmarks do largely function in most viewers. Preview doesn't show the top-level outline, though that might relate to FB4013726, filed in 2018. I have shown the created syntax to ChatGPT, which also confirmed that the syntax does not conform to the expected PDF spec: This isn’t simply a matter of PDFKit choosing an unnecessarily elaborate but valid representation. There are genuine structural problems: The top-level Page 1 object’s /Parent does not point to the /Outlines dictionary. The child objects’ /Parent does not point to their actual containing outline. There are duplicate outline objects for Page 1, Page 2 and Page 3. The required sibling Prev/Next chains are absent. The /First//Last relationships don’t correspond cleanly to the claimed hierarchy. The errors are entirely reproducible in any PDFOutlines created by PDFKit. I have filed this as FB25328043. ... and in 2021 as FB8960602. ... and in 2019 as FB5313583.
Topic: UI Frameworks SubTopic: AppKit Tags:
3
1
697
3w
Clipped render of dragged NSTableView row on macOS 27.
On macOS 27, dragged rows on my app's table views are excessively clipped (see image). I don't override methods like `tableView:draggingSession:willBeginAtPoint:forRowIndexes:` so I don’t supply my own drag images, and I don’t use NSTableView suclasses. I tried on a toy project containg with a single table view in a window, and it did not reproduce this behavior. I wonder if my issue if it’s due to my app’s table views being embedded in split views or something. Anyway, how can I fix that?
Topic: UI Frameworks SubTopic: AppKit
1
0
201
3w
UINavigationBarAppearance background does not extend to the top edge on iPhone Duo
Environment Xcode 27.1 iOS 27.1 iPhone Duo simulator UIKit app built with the iOS 27.1 SDK Issue On iPhone Duo, the background of a system-managed UINavigationBar does not extend completely to the top edge of the window. The navigation bar is configured using UINavigationBarAppearance with an opaque blue background. However, a horizontal white strip remains above the blue navigation bar. I also post a feedback: FB24859353 Questions Is this expected behavior on iPhone Duo? What is the recommended way to style this top region? Should apps add a custom background underlay outside the UINavigationBar bounds? Could this be an iOS 27.1 or iPhone Duo simulator issue? Minimal reproduction code: import UIKit final class DemoTabBarController: UITabBarController { override func viewDidLoad() { super.viewDidLoad() viewControllers = NavigationBarStyle.allCases.map { style in let content = DiagnosticsViewController(style: style) let navigationController = UINavigationController(rootViewController: content) navigationController.tabBarItem = UITabBarItem( title: style.title, image: UIImage(systemName: style.symbolName), selectedImage: nil ) style.apply(to: navigationController.navigationBar) return navigationController } } } enum NavigationBarStyle: CaseIterable { case systemDefault case appearance case legacy var title: String { switch self { case .systemDefault: return "Default" case .appearance: return "Appearance" case .legacy: return "Legacy" } } var symbolName: String { switch self { case .systemDefault: return "iphone" case .appearance: return "paintbrush" case .legacy: return "clock.arrow.circlepath" } } func apply(to navigationBar: UINavigationBar) { switch self { case .systemDefault: break case .appearance: let appearance = UINavigationBarAppearance() appearance.configureWithOpaqueBackground() appearance.backgroundColor = .demoBlue appearance.shadowColor = nil appearance.titleTextAttributes = [.foregroundColor: UIColor.white] navigationBar.tintColor = .white navigationBar.standardAppearance = appearance navigationBar.compactAppearance = appearance navigationBar.scrollEdgeAppearance = appearance case .legacy: navigationBar.tintColor = .white navigationBar.barTintColor = .demoBlue navigationBar.backgroundColor = .demoBlue navigationBar.setBackgroundImage(Self.solidImage(color: .demoBlue), for: .default) navigationBar.shadowImage = UIImage() navigationBar.isTranslucent = false navigationBar.titleTextAttributes = [.foregroundColor: UIColor.white] } } private static func solidImage(color: UIColor) -> UIImage { return UIGraphicsImageRenderer(size: CGSize(width: 1, height: 1)).image { context in color.setFill() context.fill(CGRect(x: 0, y: 0, width: 1, height: 1)) } } } private extension UIColor { static let demoBlue = UIColor(red: 0.0, green: 0.46, blue: 0.70, alpha: 1.0) }
4
2
1k
3w
NSScrollView: Overriding "scrollWheel(with:)" can cause a never-ending live scroll
Overview I'm developing an app that depends on NSScrollView to implement a scrollable and zoomable canvas. I need to override NSScrollView.scrollWheel(with:) to implement Option-zooming (holding Option while scrolling up/down to zoom in/out). I've found that simply adding these three lines of code in my NSScrollView subclass: override func scrollWheel(with event: NSEvent) { super.scrollWheel(with: event) }is enough to cause a live scroll to never end, and NSScrollView.didEndLiveScrollNotification to never fire. My app depends on that notification firing so that it can disable some interactions during a live scroll. Furthermore, while the NSScrollView is "stuck" in the live scroll, it's not possible to perform a live magnify. There are also some other effects, including elevated CPU usage and persistent scroll indicators. The issue is occurring with Xcode 27.1 (27A9275) and macOS 27.2 (26B123). I have modified the macOS App project template to showcase the issue. The sample project, along with a screen recording of the issue, can be downloaded from here: https://drive.google.com/drive/folders/1F5sF2NA230NkGbQdLfbV6vM1XmfY1-uT?usp=sharing I hope that Apple can fix this issue soon, as it's a frustrating user experience when the canvas gets stuck while scrolling. I've already filed this in Feedback Assistant under FB25362729. Steps to Reproduce To recreate the issue, follow these steps: Download and extract the "Xcode Project.zip" file from the link above. Open the extracted "NSScrollViewTest" project in Xcode. Build and run the "NSScrollViewTest" app. Scroll all the way to the right edge of the gray canvas using the horizontal scroll gesture on Magic Trackpad. If you comment out lines 8–10 of ScrollView.swift, the issue goes away. The "Issue Recording.mov" file from the link above provides a detailed video of how to recreate the issue.
Topic: UI Frameworks SubTopic: AppKit
11
0
816
3w
SplitViewController removed the ability to have a side menu on iPhone
Sometime pre-iOS 26 it was possible to use a SplitViewController so that on iPhone you saw the master as a side menu (e.g. hamburger), and the detail full screen. While on iPad you would see the master displayed in a sidebar that could be closed, with the detail fullscreen. This has changed, using a SplitViewController on iPhone now forces you into having 2 fullscreen screens, with a push/pop layout and a back button. In situations where you want the detail screen to open first, this results in users opening the app to find a back button already presented, despite having not navigated anywhere. They must "return" to a screen they never saw. I really despise this layout and find it to be quite a UX issue. But given the new iPhone Duo, using the SplitViewController is now one of the easiest ways to maintain the necessary responsiveness needed, forcing us to accept this behaviour on regular iPhones. Can we PLEASE get the old functionality back, where we can explicitly state on iPhone that the master will always be displayed as a menu?
1
0
513
3w
Workaround for NSTableView bugs introduced in macOS 27
MacOS 27 (or perhaps 26, I never used it) introduces two bugs in NSTableView (and delegate). It's always a pleasure when you find that your app no longer works properly. First, when the delegate responds to tableView:pasteboardWriterForRow:, no row can be selected by click & drag (even if the method returns nil). Which mean that clicking and dragging the mouse on rows that are not draggable simply does nothing (no selection), which is a frustrating user experience, especially considering that the same action selects rows on macOS 15. The second bug is that tableView.verticalMotionCanBeginDrag = NO is simply ignored. It doesn’t work. So, a click followed by an immediate vertical drag drags the clicked row instead of selecting rows if tableView:pasteboardWriterForRow: does not return nil. Again, it did select rows on macOS 15. That's what verticalMotionCanBeginDrag = NO is for. To work around the first bug, I implement respondsToSelector: in the delegate to return NO when the selector is tableView:pasteboardWriterForRow: and the clicked row is not draggable. This solution is not elegant, as theclickedRow property of the tableview always returns -1 when the method is called. Which means I need to determine the clicked row by other means (using the mouse location and stuff). (This solution should in principle allow working around the second bug, but I haven’t implemented it yet. It would require determining the delay between the click and the drag and the direction of the drag). So my question is: does anyone see a better workaround for these bugs?
Topic: UI Frameworks SubTopic: AppKit
3
0
348
3w
NavigationSplitView Binding to NavigationSplitViewColumn reset with every NavigationStack path change
I try to create a Navigation that works on iPhone, iPhone Duo and iPad. NavigationSplitView collapses for compact form factors and makes iPhone Duo support much simpler. The Problem is the semantic of the collapse. Switch from detail to sidebar on compact is not a 'back' action in my case. It should have my choosen Icon and has a meaning. So i wanted to control this using the NavigationSpliViewColumn Binding. This does work forward and backward as long as no NavigationStack was used before. But it stops working when you return to the detail root from a Navigation-Action. I left the Backbutton visible so you can test, that it continues to work, when no Navigation-Action preceeded the switch. Here is my Code: import SwiftUI @Observable final class Compass { var path: [Route] init() { self.path = [] } } enum Route: Hashable { case goal } struct ContentView: View { @Environment(\.horizontalSizeClass) private var hsize @State private var compass: Compass = Compass() @State var column: NavigationSplitViewColumn = .detail var body: some View { NavigationSplitView(preferredCompactColumn: $column) { OverviewScreen(column: $column) } detail: { TodayScreen() .toolbar { ToolbarItem(placement: .topBarLeading) { Button("overview", systemImage: "calendar") { self.column = .sidebar } } } } .environment(compass) .onChange(of: column) { old, new in print("column:", old, "→", new) } } } struct OverviewScreen: View { @Binding var column: NavigationSplitViewColumn @Environment(Compass.self) var compass var body: some View { @Bindable var compass = self.compass ScrollView { Text("Overview") .font(.largeTitle) .fontWeight(.heavy) Button("Switch") { self.column = .detail } } } } struct TodayScreen: View { @Environment(Compass.self) var compass var body: some View { @Bindable var compass = self.compass NavigationStack(path: $compass.path) { ScrollView { Text("Today") .font(.largeTitle) .fontWeight(.heavy) Button("Goals programtically", systemImage: "flag.fill") { self.compass.path = [.goal] } NavigationLink(value: Route.goal) { Label("Goal Link", systemImage: "flag.fill") } } .navigationDestination(for: Route.self, destination: self.screen) } } @ContentBuilder func screen(for route: Route) -> some View { switch route { case .goal: Text("Goals") } } } #Preview { ContentView() }This seems unexpected behaviour. If you ask AI the mental model is NavigationSplitViewColumn represents which column is currently visible for the user. That model would be wrong. Also i can't understand why a NavigationStack has to change the Binding? What am i missing here? Is my idea of the programmatic switch not supported? There are other ways to push from compact to your detail column again, but they all have trade-offs or run into other problems. I would appreciate any help here. AI has not understood this and only does surface level work arounds that fix nothing.
0
0
74
3w
NSSegmentedControl style ineffective.
I'm not sure if it's something wrong with my XCode install (Version 27.1, macOS 27.2) or what, because such a serious issue should be mentioned already... Basically, building my objC app with the latest XCode makes the NSSegmentedControl style ineffective. Likewise, changing the style in the attribute of the control in interface builder has no visible effect on the preview either. Changing the style in code or in IB has no effect. The control appears stuck with a style that implements a blue background for the selected segment (some default style I guess). I tried with a minimalistic app that includes only one window and the control. The issue is still present. Any suggestion? Am I the only one experiencing this?
Topic: UI Frameworks SubTopic: AppKit
8
0
523
3w
NSScrollView scrolling hitch
When scrolling a basic NSScrollView there seems to be a sudden jump after each flick. Scrolling does not appear smooth and is disorientating. A scroll jump seems to happen directly after letting go of a scroll flick using a trackpad/mouse. Right at that moment the scroll turns into a momentum scroll, slowly decreasing the speed. But the first frame after the gesture the content jumps forward, more than what is expected. Observations: Counterintuitively, scrolling appears to be smoother when disabling NSScrollView.isCompatibleWithResponsiveScrolling. If disabled using a custom NSScrollView subclass there is no large jump anymore. Scrolling also appears to be smoother using a SwiftUI ScrollView. I assume that has the same behaviour as a disabled isCompatibleWithResponsiveScrolling Ironically a WKWebView scrolls much smoother. No sudden jump is observable. It also seems to scroll with faster acceleration, but the individual frames do appear smoother. Why is this better than a native NSScrollView? Elastic scrolling at the bounds of the scroll view also appears much smoother for WKWebViews. When pulling to refresh there is a jump for NSScrollView/SwiftUI, but not for WKWebView. When using an NSScrollView with isCompatibleWithResponsiveScrolling disabled, scrolling appears just as smooth as WKWebView on macOS 13 Ventura and below. On macOS 14 Sonoma scrolling behaviour is suddenly different. Please see a sample project with 4 different scroll views side by side: https://github.com/floorish/ScrollTest Screen recordings show the sudden jumps when scrolling and when elastic scrolling. Tested on Intel & Arm Macs, macOS 11 Big Sur through 15 Sequoia, built with Xcode 16. Should isCompatibleWithResponsiveScrolling be disabled on Sonoma+? Are there any drawbacks? There is also no overdraw anymore since Monterey, as described in https://developer.apple.com/library/archive/releasenotes/AppKit/RN-AppKitOlderNotes/#10_9Scrolling Even with responsive scrolling disabled, why is WKWebView scrolling much smoother than NSScrollView?
Topic: UI Frameworks SubTopic: AppKit Tags:
9
3
1.4k
3w
What pattern to use for an iPhone Tabview app
I have an iPhone tab view application that has not been designed for iPad, and I am aiming to add a left-hand bar that summarises some content and keeps visible what is normally a sheet. What pattern would work best for this? At present, I pass the view to another view with a navigation stack containing an arrangement view with the previous view and then the sidebar as a secondary view within it—would that be the appropriate approach?
Topic: UI Frameworks SubTopic: SwiftUI
3
0
466
3w
UITextContentType.cellularIMEI works on iOS 27+ only
During testing, we found that IMEI AutoFill behaves differently by iOS version, independent of the entitlement, and would like to confirm the expected behavior. Test details Implementation: textContentType = .cellularIMEI on the IMEI input field Entitlement status: no carrier-related entitlements in the test build Observed results iOS 27: The IMEI AutoFill suggestion appears and works in any app, regardless of carrier entitlement. iOS 26 and earlier: The IMEI AutoFill suggestion does not appear. Questions Is it the expected and intended behavior that, on iOS 27, IMEI AutoFill is available to any app without a carrier entitlement? On iOS versions earlier than 27 (iOS 17.4 to 26), is the public cellular plan entitlement required for IMEI AutoFill to work? If not, are there other conditions or requirements? On dual-IMEI devices, which IMEI (IMEI or IMEI2) is filled when .cellularIMEI is used on iOS 27? Should we use .cellularIMEI1 / .cellularIMEI2 to specify it explicitly? Thank you for your support.
1
0
197
3w
UIKit snapshot views render empty into UIImage on physical devices, but work in Simulator
Is there a supported way to convert the cached contents of a UIKit snapshot view into a UIImage on physical iOS/iPadOS devices? A view returned by snapshotView(afterScreenUpdates:) displays correctly on hardware, but drawing that view into a UIGraphicsImageRenderer produces no cached-content pixels. drawHierarchy(in:afterScreenUpdates:) still returns true. The same base experiment succeeds in Simulator. Feedback Assistant report: FB25336445. A standalone reproducer and measurements are attached there; use the corrected replica-readback-ios-27.0.1-fixed-project.zip attachment. Tested environments Physical iPhone 15 Pro Max: iOS 27.0.1 (24A446). Physical iPad mini (6th generation): iPadOS 26.6.1 (23G83). Two independent app launches produced identical measurements. Simulator: iPhone 18 Pro / iOS 27.0 and iPhone 15 Pro Max / iOS 26.1. The app is a standalone UIKit Release build, launched without a debugger or XCTest. It uses an ordinary red UIView and a white UILabel: no WebKit, Liquid Glass, video, secure text fields, third-party libraries, or private API calls. I have not tested a physical iPhone on the 26 series or iOS 27.0.2. The Simulator and device OS patch versions differ, so this is not a controlled OS-only comparison. Reproduction Display a red 240 x 160 UIView containing a white UILabel; allow it to render. Draw the original view into an image as a positive control. Call source.snapshotView(afterScreenUpdates: false), attach the replica to the window at the source frame, wait 500 ms, hide the original, then wait another 500 ms. Draw the attached replica into transparent and cyan-prefilled image contexts. Add an ordinary red 30 x 30 child UIView to the replica, wait 500 ms, and capture again. Repeat with replicas from UIWindow.snapshotView and UIScreen.snapshotView. This is the capture operation, called on the main actor after those waits: func rasterize(_ target: UIView, cyanBackground: Bool) -> UIImage { let format = UIGraphicsImageRendererFormat() format.scale = 1 format.opaque = false return UIGraphicsImageRenderer(size: target.bounds.size, format: format) .image { context in if cyanBackground { UIColor.cyan.setFill() context.fill(target.bounds) } let success = target.drawHierarchy( in: target.bounds, afterScreenUpdates: true ) print("drawHierarchy:", success) } }Results On both physical devices: The original 240 x 160 UIView renders normally: all 38,400 pixels are nontransparent. The replica on a transparent target produces zero nontransparent pixels. The replica on a cyan target leaves all 38,400 pixels cyan. Adding an ordinary child view produces approximately 900 red pixels, but the replica's cached contents are still missing. UIView, UIWindow and UIScreen replicas all exhibit the omission, while drawHierarchy returns true. In both tested Simulators, the base experiment renders the replica contents and overwrites the cyan background. The child-marker addition was tested on physical devices only. These counts are measured from the CGImage before PNG encoding. Thus “black output” with an opaque context appears to be missing content, not pixels painted black: transparent and cyan targets retain their original contents. Questions Is bitmap readback of these snapshot views supported on physical devices, or are they only intended for on-screen composition? If unsupported, is the Simulator behavior expected, and why does drawHierarchy return success despite omitting the visible cached contents? Is there a supported API to materialize those cached contents as an image, without starting a screen-recording session? Capturing the original view directly is a useful control, but does not answer how to read back an already-created snapshot. I found this older AVSampleBufferDisplayLayer discussion, which also describes a correctly displayed snapshot view becoming black when converted to an image. My reproducer uses only ordinary UIKit views; I do not know whether the underlying cause is related.
Topic: UI Frameworks SubTopic: UIKit
5
0
382
3w
Best way to position game touch controls around the iPhone Duo hinge
For a full-screen game with a Metal/Unreal rendering view and a SwiftUI overlay for touch controls, what is the recommended way to keep interactive controls away from the hinge while still allowing the rendered game world to use the full display? Would you recommend querying ReservedRegion in the SwiftUI overlay while allowing the underlying render view to remain edge-to-edge? Also, should control placement respond continuously while the device is being folded, or primarily respond to layout/reserved-region changes once the pose changes?
Topic: UI Frameworks SubTopic: SwiftUI
1
0
131
3w
iPhone Duo black bars in landscape on iOS 27.1
I am implementing support for iPhone Duo, and have seen this in many places: Apps built with the iOS 27.1 SDK or later are optimized for iPhone Duo. Apps will extend to use the full display, with toolbars and tab bars appearing vertically below the status bar. (from https://developer.apple.com/iphone-duo/prepare/) But when I build my application in Xcode 27.1, in both the simulator, and on the Duo hardware, my application is not extending to the full-width of the screen when built for iOS 27.1. There are black bars on both the left and right. When I debug the view hierarchy, I do not see the black bars, which indicates to me this is happening at the OS level, not as a result of my constraints. Note that there are no black bars in portrait mode, or on the front screen. In my project settings, only the iPhone Orientation "Portrait" is checked, but I don't want to check Landscape orientations there, because the application does not look good in landscape on a standard iPhone aspect ratio. Are those checkboxes required to remove the black bars? (Checking them does appear to do so, but again, this is quite problematic for the current design of the application.) Thanks in advance for any insights or help you can provide!
Topic: UI Frameworks SubTopic: UIKit
Replies
3
Boosts
0
Views
117
Activity
2w
No access to dictation from third-party keyboards on iPhone Duo
On a physical iPhone Duo running iOS 27.1 and later, the system dictation button is placed inside the system keyboard, next to the space bar. Because the button belongs to the system keyboard layout, it isn't available while a third-party keyboard is active. On other iPhone models, the dictation button appears separately from the keyboard, so it stays available with third-party keyboards. On iPhone Duo, our users have no way to start dictation without switching back to the system keyboard. The iPhone Duo Simulator shows the button at the far right, which doesn't match the physical device, so this can't be evaluated accurately in the Simulator. As far as I can tell, there is no public API that lets a keyboard extension start system dictation, so we can't work around this from the extension. My questions: Is this placement intended on iPhone Duo? Is there a supported way for a keyboard extension to offer dictation on this device? If not, are there plans for a separate system dictation button, as on other iPhone models, or a public API for keyboard extensions? I've filed this as FB[number]. If you develop a keyboard extension and see the same issue, please file your own report and reference this number.
Replies
1
Boosts
0
Views
137
Activity
2w
PDFView context menu: "Actual Size"
In a PDFView, the OS provides a context menu which contains (among other things) "Actual Size" zoom. This command wrongly displays the page at 1 point = 1 pixel. Traditionally on MacOS, "Actual Size" displays the page at 1 inch on page = 1 inch on screen, e.g. for a Letter page, 8.5 x 11 inches on the screen. (So the API needs to determine the display's pixel density to calculate the zoom size.) In Preview 11.0 on Os 27.2, "Actual Size" in the PDFView context menu and in the View menu both zoom to 1 point = 1 pixel. In Preview on Sequoia, Actual Size in the View menu displays at 1 inch = 1 inch, but the context menu gives 1 pt = 1px. (The latter presumably relying on the built-in context menu from PDFView.) Note that in Pages.app, Actual View gives the expected 1 inch = 1 inch on screen.
Replies
1
Boosts
0
Views
110
Activity
2w
NavigationSplitView, endless loop detail<->content
Hi, I already had a problem with the NavigationSplitView before, and I'm still working on it. The NavigationSplitView issue on the phone occurs when trying to navigate back from the detail view to the content view; the app automatically navigates straight back to the detail view. I reproduced the issue in a small program and identified the critical section. However, I do not know why the problem is occurring. I did the same thing again, but this time with @Query, and there was no problem. The categories, recipes and single recipe, all loaded by @Query and no side effects. Requirements for the content: A state variable used in the view, e.g., isLoading A task that loads the data from a ModelActor in a ViewModel, setting isLoading to true beforehand and back to false upon completion Subsequently, it is only possible to exit the detail view after many attempts, because the app immediately navigates back to the detail view automatically upon trying to leave it. One issue is changing the isLoading status variable from within the task. That in itself isn't the problem; the issue only arises when reading data via a ModelActor. If the status variable is changed and, for example, the list is modified manually, there is no problem. It only occurs when a ModelActor is used. I based it on the NavigationCookbook: This is the view I use for the content section (list): @State private var vm: RecipeListViewModel = .init() @State var isLoading: Bool = false if isLoading { ProgressView("Loading...") } else { List(selection: $selectedRecipe) { ForEach(vm.recipes) { recipe in NavigationLink(recipe.name, value: recipe) } } } .task { // bug, when used in UI, because of ModelActor isLoading = true await vm.list(context, categoryName: selectedCategory.name) isLoading = false } .task { // works, because manually modifying the list isLoading = true await vm.addRecipe(context, categoryName: selectedCategory.name) isLoading = false } inside ViewModel // bug func list(_ modelContext: ModelContext, categoryName: String) async { recipes.removeAll() let dh: RecipeDataHandler = .init(modelContainer: modelContext.container) let values = await dh.listByName(categoryName: categoryName) for v in values { recipes.append(.init(recipeId: v.recipeId, name: v.name)) } } // works func addRecipe(_ modelContext: ModelContext, categoryName: String) async { isLoading = true defer { isLoading = false } recipes.removeAll() recipes.append(.init(recipeId: "a", name: "Pambazo")) } ModelActor @ModelActor actor RecipeDataHandler { func listByName(categoryName: String) async -> [RecipeData] { var list: [RecipeData] = [] do { let fd = FetchDescriptor<Recipe>(predicate: #Predicate { $0.category.name == categoryName }, sortBy: [SortDescriptor(\Recipe.name)]) let data = try modelContext.fetch(fd) for item in data { let rec: RecipeData = await .init(recipeId: item.recipeId, name: item.name) list.append(rec) } } catch { print("error: \(error.localizedDescription)") } return list } } Recipe is a @Model and RecipeData just a struct. In principle, everything should run on the MainActor, but the inclusion of the ModelActor still leads to this strange behavior. Any idea what the problem might be? Christian
Replies
3
Boosts
0
Views
374
Activity
2w
Fundamental error in PDFOutline created syntax
PDFKit's PDFOutline creates fundamentally flawed PDF syntax when it creates outlines ("Bookmarks") in a PDF document. A PDF document is created with three outlines: "Page 1", "Page 2" and "Page 3". Each is a child of the former, so "Page 3" is a child of "Page 2", and "Page 2" is a child of "Page 1". PDFKit produces flawed PDF syntax, with duplicate entries for each bookmark, missing sibling links, and a convoluted Parent > Child relationship. 3 0 obj << /Type /Pages /Parent 45 0 R /Count 8 /Kids [ 2 0 R 6 0 R 9 0 R 12 0 R 15 0 R 18 0 R 21 0 R 24 0 R ] >> endobj 28 0 obj << /Type /Pages /Parent 45 0 R /Count 3 /Kids [ 27 0 R 31 0 R 34 0 R ] >> endobj 45 0 obj << /Type /Pages /MediaBox [0 0 612 792] /Count 11 /Kids [ 3 0 R 28 0 R ] >> endobj 46 0 obj << /Type /Catalog /Outlines 1 0 R /Pages 45 0 R >> endobj 1 0 obj << /First 47 0 R /Last 48 0 R >> endobj 48 0 obj << /Last 49 0 R /Count -1 /First 50 0 R /Title (Page 1) /Dest [ 2 0 R /XYZ 0 841.88 null ] /Parent 51 0 R >> endobj 51 0 obj << >> endobj 50 0 obj << /Last 52 0 R /Count -1 /First 53 0 R /Title (Page 2) /Dest [ 6 0 R /XYZ 0 841.88 null ] /Parent 51 0 R >> endobj 53 0 obj << /Dest [ 9 0 R /XYZ 0 841.88 null ] /Count 0 /Title (Page 3) /Parent 51 0 R >> endobj 52 0 obj << /Dest [ 9 0 R /XYZ 0 841.88 null ] /Count 0 /Title (Page 3) /Parent 51 0 R >> endobj 49 0 obj << /Last 52 0 R /Count -1 /First 53 0 R /Title (Page 2) /Dest [ 6 0 R /XYZ 0 841.88 null ] /Parent 51 0 R >> endobj 47 0 obj << /Last 49 0 R /Count -1 /First 50 0 R /Title (Page 1) /Dest [ 2 0 R /XYZ 0 841.88 null ] /Parent 51 0 R >> endobj(The Parent of all the outline objects is given as object 51, which is blank. The First/Last objects don't link correctly to the expected hierarchy, etc, etc.) Acrobat preflight will flag this as a syntax error, though the bookmarks do largely function in most viewers. Preview doesn't show the top-level outline, though that might relate to FB4013726, filed in 2018. I have shown the created syntax to ChatGPT, which also confirmed that the syntax does not conform to the expected PDF spec: This isn’t simply a matter of PDFKit choosing an unnecessarily elaborate but valid representation. There are genuine structural problems: The top-level Page 1 object’s /Parent does not point to the /Outlines dictionary. The child objects’ /Parent does not point to their actual containing outline. There are duplicate outline objects for Page 1, Page 2 and Page 3. The required sibling Prev/Next chains are absent. The /First//Last relationships don’t correspond cleanly to the claimed hierarchy. The errors are entirely reproducible in any PDFOutlines created by PDFKit. I have filed this as FB25328043. ... and in 2021 as FB8960602. ... and in 2019 as FB5313583.
Topic: UI Frameworks SubTopic: AppKit Tags:
Replies
3
Boosts
1
Views
697
Activity
3w
Non-collapsing title
In the Photos app, the Collections title doesn't collapse into a small inline title when scrolling, unlike a standard inline large title display mode. How is this implemented?
Replies
2
Boosts
0
Views
218
Activity
3w
Clipped render of dragged NSTableView row on macOS 27.
On macOS 27, dragged rows on my app's table views are excessively clipped (see image). I don't override methods like `tableView:draggingSession:willBeginAtPoint:forRowIndexes:` so I don’t supply my own drag images, and I don’t use NSTableView suclasses. I tried on a toy project containg with a single table view in a window, and it did not reproduce this behavior. I wonder if my issue if it’s due to my app’s table views being embedded in split views or something. Anyway, how can I fix that?
Topic: UI Frameworks SubTopic: AppKit
Replies
1
Boosts
0
Views
201
Activity
3w
UINavigationBarAppearance background does not extend to the top edge on iPhone Duo
Environment Xcode 27.1 iOS 27.1 iPhone Duo simulator UIKit app built with the iOS 27.1 SDK Issue On iPhone Duo, the background of a system-managed UINavigationBar does not extend completely to the top edge of the window. The navigation bar is configured using UINavigationBarAppearance with an opaque blue background. However, a horizontal white strip remains above the blue navigation bar. I also post a feedback: FB24859353 Questions Is this expected behavior on iPhone Duo? What is the recommended way to style this top region? Should apps add a custom background underlay outside the UINavigationBar bounds? Could this be an iOS 27.1 or iPhone Duo simulator issue? Minimal reproduction code: import UIKit final class DemoTabBarController: UITabBarController { override func viewDidLoad() { super.viewDidLoad() viewControllers = NavigationBarStyle.allCases.map { style in let content = DiagnosticsViewController(style: style) let navigationController = UINavigationController(rootViewController: content) navigationController.tabBarItem = UITabBarItem( title: style.title, image: UIImage(systemName: style.symbolName), selectedImage: nil ) style.apply(to: navigationController.navigationBar) return navigationController } } } enum NavigationBarStyle: CaseIterable { case systemDefault case appearance case legacy var title: String { switch self { case .systemDefault: return "Default" case .appearance: return "Appearance" case .legacy: return "Legacy" } } var symbolName: String { switch self { case .systemDefault: return "iphone" case .appearance: return "paintbrush" case .legacy: return "clock.arrow.circlepath" } } func apply(to navigationBar: UINavigationBar) { switch self { case .systemDefault: break case .appearance: let appearance = UINavigationBarAppearance() appearance.configureWithOpaqueBackground() appearance.backgroundColor = .demoBlue appearance.shadowColor = nil appearance.titleTextAttributes = [.foregroundColor: UIColor.white] navigationBar.tintColor = .white navigationBar.standardAppearance = appearance navigationBar.compactAppearance = appearance navigationBar.scrollEdgeAppearance = appearance case .legacy: navigationBar.tintColor = .white navigationBar.barTintColor = .demoBlue navigationBar.backgroundColor = .demoBlue navigationBar.setBackgroundImage(Self.solidImage(color: .demoBlue), for: .default) navigationBar.shadowImage = UIImage() navigationBar.isTranslucent = false navigationBar.titleTextAttributes = [.foregroundColor: UIColor.white] } } private static func solidImage(color: UIColor) -> UIImage { return UIGraphicsImageRenderer(size: CGSize(width: 1, height: 1)).image { context in color.setFill() context.fill(CGRect(x: 0, y: 0, width: 1, height: 1)) } } } private extension UIColor { static let demoBlue = UIColor(red: 0.0, green: 0.46, blue: 0.70, alpha: 1.0) }
Replies
4
Boosts
2
Views
1k
Activity
3w
NSScrollView: Overriding "scrollWheel(with:)" can cause a never-ending live scroll
Overview I'm developing an app that depends on NSScrollView to implement a scrollable and zoomable canvas. I need to override NSScrollView.scrollWheel(with:) to implement Option-zooming (holding Option while scrolling up/down to zoom in/out). I've found that simply adding these three lines of code in my NSScrollView subclass: override func scrollWheel(with event: NSEvent) { super.scrollWheel(with: event) }is enough to cause a live scroll to never end, and NSScrollView.didEndLiveScrollNotification to never fire. My app depends on that notification firing so that it can disable some interactions during a live scroll. Furthermore, while the NSScrollView is "stuck" in the live scroll, it's not possible to perform a live magnify. There are also some other effects, including elevated CPU usage and persistent scroll indicators. The issue is occurring with Xcode 27.1 (27A9275) and macOS 27.2 (26B123). I have modified the macOS App project template to showcase the issue. The sample project, along with a screen recording of the issue, can be downloaded from here: https://drive.google.com/drive/folders/1F5sF2NA230NkGbQdLfbV6vM1XmfY1-uT?usp=sharing I hope that Apple can fix this issue soon, as it's a frustrating user experience when the canvas gets stuck while scrolling. I've already filed this in Feedback Assistant under FB25362729. Steps to Reproduce To recreate the issue, follow these steps: Download and extract the "Xcode Project.zip" file from the link above. Open the extracted "NSScrollViewTest" project in Xcode. Build and run the "NSScrollViewTest" app. Scroll all the way to the right edge of the gray canvas using the horizontal scroll gesture on Magic Trackpad. If you comment out lines 8–10 of ScrollView.swift, the issue goes away. The "Issue Recording.mov" file from the link above provides a detailed video of how to recreate the issue.
Topic: UI Frameworks SubTopic: AppKit
Replies
11
Boosts
0
Views
816
Activity
3w
SplitViewController removed the ability to have a side menu on iPhone
Sometime pre-iOS 26 it was possible to use a SplitViewController so that on iPhone you saw the master as a side menu (e.g. hamburger), and the detail full screen. While on iPad you would see the master displayed in a sidebar that could be closed, with the detail fullscreen. This has changed, using a SplitViewController on iPhone now forces you into having 2 fullscreen screens, with a push/pop layout and a back button. In situations where you want the detail screen to open first, this results in users opening the app to find a back button already presented, despite having not navigated anywhere. They must "return" to a screen they never saw. I really despise this layout and find it to be quite a UX issue. But given the new iPhone Duo, using the SplitViewController is now one of the easiest ways to maintain the necessary responsiveness needed, forcing us to accept this behaviour on regular iPhones. Can we PLEASE get the old functionality back, where we can explicitly state on iPhone that the master will always be displayed as a menu?
Replies
1
Boosts
0
Views
513
Activity
3w
Workaround for NSTableView bugs introduced in macOS 27
MacOS 27 (or perhaps 26, I never used it) introduces two bugs in NSTableView (and delegate). It's always a pleasure when you find that your app no longer works properly. First, when the delegate responds to tableView:pasteboardWriterForRow:, no row can be selected by click & drag (even if the method returns nil). Which mean that clicking and dragging the mouse on rows that are not draggable simply does nothing (no selection), which is a frustrating user experience, especially considering that the same action selects rows on macOS 15. The second bug is that tableView.verticalMotionCanBeginDrag = NO is simply ignored. It doesn’t work. So, a click followed by an immediate vertical drag drags the clicked row instead of selecting rows if tableView:pasteboardWriterForRow: does not return nil. Again, it did select rows on macOS 15. That's what verticalMotionCanBeginDrag = NO is for. To work around the first bug, I implement respondsToSelector: in the delegate to return NO when the selector is tableView:pasteboardWriterForRow: and the clicked row is not draggable. This solution is not elegant, as theclickedRow property of the tableview always returns -1 when the method is called. Which means I need to determine the clicked row by other means (using the mouse location and stuff). (This solution should in principle allow working around the second bug, but I haven’t implemented it yet. It would require determining the delay between the click and the drag and the direction of the drag). So my question is: does anyone see a better workaround for these bugs?
Topic: UI Frameworks SubTopic: AppKit
Replies
3
Boosts
0
Views
348
Activity
3w
NavigationSplitView Binding to NavigationSplitViewColumn reset with every NavigationStack path change
I try to create a Navigation that works on iPhone, iPhone Duo and iPad. NavigationSplitView collapses for compact form factors and makes iPhone Duo support much simpler. The Problem is the semantic of the collapse. Switch from detail to sidebar on compact is not a 'back' action in my case. It should have my choosen Icon and has a meaning. So i wanted to control this using the NavigationSpliViewColumn Binding. This does work forward and backward as long as no NavigationStack was used before. But it stops working when you return to the detail root from a Navigation-Action. I left the Backbutton visible so you can test, that it continues to work, when no Navigation-Action preceeded the switch. Here is my Code: import SwiftUI @Observable final class Compass { var path: [Route] init() { self.path = [] } } enum Route: Hashable { case goal } struct ContentView: View { @Environment(\.horizontalSizeClass) private var hsize @State private var compass: Compass = Compass() @State var column: NavigationSplitViewColumn = .detail var body: some View { NavigationSplitView(preferredCompactColumn: $column) { OverviewScreen(column: $column) } detail: { TodayScreen() .toolbar { ToolbarItem(placement: .topBarLeading) { Button("overview", systemImage: "calendar") { self.column = .sidebar } } } } .environment(compass) .onChange(of: column) { old, new in print("column:", old, "→", new) } } } struct OverviewScreen: View { @Binding var column: NavigationSplitViewColumn @Environment(Compass.self) var compass var body: some View { @Bindable var compass = self.compass ScrollView { Text("Overview") .font(.largeTitle) .fontWeight(.heavy) Button("Switch") { self.column = .detail } } } } struct TodayScreen: View { @Environment(Compass.self) var compass var body: some View { @Bindable var compass = self.compass NavigationStack(path: $compass.path) { ScrollView { Text("Today") .font(.largeTitle) .fontWeight(.heavy) Button("Goals programtically", systemImage: "flag.fill") { self.compass.path = [.goal] } NavigationLink(value: Route.goal) { Label("Goal Link", systemImage: "flag.fill") } } .navigationDestination(for: Route.self, destination: self.screen) } } @ContentBuilder func screen(for route: Route) -> some View { switch route { case .goal: Text("Goals") } } } #Preview { ContentView() }This seems unexpected behaviour. If you ask AI the mental model is NavigationSplitViewColumn represents which column is currently visible for the user. That model would be wrong. Also i can't understand why a NavigationStack has to change the Binding? What am i missing here? Is my idea of the programmatic switch not supported? There are other ways to push from compact to your detail column again, but they all have trade-offs or run into other problems. I would appreciate any help here. AI has not understood this and only does surface level work arounds that fix nothing.
Replies
0
Boosts
0
Views
74
Activity
3w
NSSegmentedControl style ineffective.
I'm not sure if it's something wrong with my XCode install (Version 27.1, macOS 27.2) or what, because such a serious issue should be mentioned already... Basically, building my objC app with the latest XCode makes the NSSegmentedControl style ineffective. Likewise, changing the style in the attribute of the control in interface builder has no visible effect on the preview either. Changing the style in code or in IB has no effect. The control appears stuck with a style that implements a blue background for the selected segment (some default style I guess). I tried with a minimalistic app that includes only one window and the control. The issue is still present. Any suggestion? Am I the only one experiencing this?
Topic: UI Frameworks SubTopic: AppKit
Replies
8
Boosts
0
Views
523
Activity
3w
NSScrollView scrolling hitch
When scrolling a basic NSScrollView there seems to be a sudden jump after each flick. Scrolling does not appear smooth and is disorientating. A scroll jump seems to happen directly after letting go of a scroll flick using a trackpad/mouse. Right at that moment the scroll turns into a momentum scroll, slowly decreasing the speed. But the first frame after the gesture the content jumps forward, more than what is expected. Observations: Counterintuitively, scrolling appears to be smoother when disabling NSScrollView.isCompatibleWithResponsiveScrolling. If disabled using a custom NSScrollView subclass there is no large jump anymore. Scrolling also appears to be smoother using a SwiftUI ScrollView. I assume that has the same behaviour as a disabled isCompatibleWithResponsiveScrolling Ironically a WKWebView scrolls much smoother. No sudden jump is observable. It also seems to scroll with faster acceleration, but the individual frames do appear smoother. Why is this better than a native NSScrollView? Elastic scrolling at the bounds of the scroll view also appears much smoother for WKWebViews. When pulling to refresh there is a jump for NSScrollView/SwiftUI, but not for WKWebView. When using an NSScrollView with isCompatibleWithResponsiveScrolling disabled, scrolling appears just as smooth as WKWebView on macOS 13 Ventura and below. On macOS 14 Sonoma scrolling behaviour is suddenly different. Please see a sample project with 4 different scroll views side by side: https://github.com/floorish/ScrollTest Screen recordings show the sudden jumps when scrolling and when elastic scrolling. Tested on Intel & Arm Macs, macOS 11 Big Sur through 15 Sequoia, built with Xcode 16. Should isCompatibleWithResponsiveScrolling be disabled on Sonoma+? Are there any drawbacks? There is also no overdraw anymore since Monterey, as described in https://developer.apple.com/library/archive/releasenotes/AppKit/RN-AppKitOlderNotes/#10_9Scrolling Even with responsive scrolling disabled, why is WKWebView scrolling much smoother than NSScrollView?
Topic: UI Frameworks SubTopic: AppKit Tags:
Replies
9
Boosts
3
Views
1.4k
Activity
3w
What pattern to use for an iPhone Tabview app
I have an iPhone tab view application that has not been designed for iPad, and I am aiming to add a left-hand bar that summarises some content and keeps visible what is normally a sheet. What pattern would work best for this? At present, I pass the view to another view with a navigation stack containing an arrangement view with the previous view and then the sidebar as a secondary view within it—would that be the appropriate approach?
Topic: UI Frameworks SubTopic: SwiftUI
Replies
3
Boosts
0
Views
466
Activity
3w
UITextContentType.cellularIMEI works on iOS 27+ only
During testing, we found that IMEI AutoFill behaves differently by iOS version, independent of the entitlement, and would like to confirm the expected behavior. Test details Implementation: textContentType = .cellularIMEI on the IMEI input field Entitlement status: no carrier-related entitlements in the test build Observed results iOS 27: The IMEI AutoFill suggestion appears and works in any app, regardless of carrier entitlement. iOS 26 and earlier: The IMEI AutoFill suggestion does not appear. Questions Is it the expected and intended behavior that, on iOS 27, IMEI AutoFill is available to any app without a carrier entitlement? On iOS versions earlier than 27 (iOS 17.4 to 26), is the public cellular plan entitlement required for IMEI AutoFill to work? If not, are there other conditions or requirements? On dual-IMEI devices, which IMEI (IMEI or IMEI2) is filled when .cellularIMEI is used on iOS 27? Should we use .cellularIMEI1 / .cellularIMEI2 to specify it explicitly? Thank you for your support.
Replies
1
Boosts
0
Views
197
Activity
3w
UIKit snapshot views render empty into UIImage on physical devices, but work in Simulator
Is there a supported way to convert the cached contents of a UIKit snapshot view into a UIImage on physical iOS/iPadOS devices? A view returned by snapshotView(afterScreenUpdates:) displays correctly on hardware, but drawing that view into a UIGraphicsImageRenderer produces no cached-content pixels. drawHierarchy(in:afterScreenUpdates:) still returns true. The same base experiment succeeds in Simulator. Feedback Assistant report: FB25336445. A standalone reproducer and measurements are attached there; use the corrected replica-readback-ios-27.0.1-fixed-project.zip attachment. Tested environments Physical iPhone 15 Pro Max: iOS 27.0.1 (24A446). Physical iPad mini (6th generation): iPadOS 26.6.1 (23G83). Two independent app launches produced identical measurements. Simulator: iPhone 18 Pro / iOS 27.0 and iPhone 15 Pro Max / iOS 26.1. The app is a standalone UIKit Release build, launched without a debugger or XCTest. It uses an ordinary red UIView and a white UILabel: no WebKit, Liquid Glass, video, secure text fields, third-party libraries, or private API calls. I have not tested a physical iPhone on the 26 series or iOS 27.0.2. The Simulator and device OS patch versions differ, so this is not a controlled OS-only comparison. Reproduction Display a red 240 x 160 UIView containing a white UILabel; allow it to render. Draw the original view into an image as a positive control. Call source.snapshotView(afterScreenUpdates: false), attach the replica to the window at the source frame, wait 500 ms, hide the original, then wait another 500 ms. Draw the attached replica into transparent and cyan-prefilled image contexts. Add an ordinary red 30 x 30 child UIView to the replica, wait 500 ms, and capture again. Repeat with replicas from UIWindow.snapshotView and UIScreen.snapshotView. This is the capture operation, called on the main actor after those waits: func rasterize(_ target: UIView, cyanBackground: Bool) -> UIImage { let format = UIGraphicsImageRendererFormat() format.scale = 1 format.opaque = false return UIGraphicsImageRenderer(size: target.bounds.size, format: format) .image { context in if cyanBackground { UIColor.cyan.setFill() context.fill(target.bounds) } let success = target.drawHierarchy( in: target.bounds, afterScreenUpdates: true ) print("drawHierarchy:", success) } }Results On both physical devices: The original 240 x 160 UIView renders normally: all 38,400 pixels are nontransparent. The replica on a transparent target produces zero nontransparent pixels. The replica on a cyan target leaves all 38,400 pixels cyan. Adding an ordinary child view produces approximately 900 red pixels, but the replica's cached contents are still missing. UIView, UIWindow and UIScreen replicas all exhibit the omission, while drawHierarchy returns true. In both tested Simulators, the base experiment renders the replica contents and overwrites the cyan background. The child-marker addition was tested on physical devices only. These counts are measured from the CGImage before PNG encoding. Thus “black output” with an opaque context appears to be missing content, not pixels painted black: transparent and cyan targets retain their original contents. Questions Is bitmap readback of these snapshot views supported on physical devices, or are they only intended for on-screen composition? If unsupported, is the Simulator behavior expected, and why does drawHierarchy return success despite omitting the visible cached contents? Is there a supported API to materialize those cached contents as an image, without starting a screen-recording session? Capturing the original view directly is a useful control, but does not answer how to read back an already-created snapshot. I found this older AVSampleBufferDisplayLayer discussion, which also describes a correctly displayed snapshot view becoming black when converted to an image. My reproducer uses only ordinary UIKit views; I do not know whether the underlying cause is related.
Topic: UI Frameworks SubTopic: UIKit
Replies
5
Boosts
0
Views
382
Activity
3w
Best way to position game touch controls around the iPhone Duo hinge
For a full-screen game with a Metal/Unreal rendering view and a SwiftUI overlay for touch controls, what is the recommended way to keep interactive controls away from the hinge while still allowing the rendered game world to use the full display? Would you recommend querying ReservedRegion in the SwiftUI overlay while allowing the underlying render view to remain edge-to-edge? Also, should control placement respond continuously while the device is being folded, or primarily respond to layout/reserved-region changes once the pose changes?
Topic: UI Frameworks SubTopic: SwiftUI
Replies
1
Boosts
0
Views
131
Activity
3w