Two iPhones signed in to the same Apple Account.
Device A (hotspot provider): iPhone 17 Pro, iOS 27.3 beta 2 (24C5049d)
Device B (client): iPhone 13, iOS 27.0.1
B cannot wake A's Personal Hotspot on its own. If no other device is connected to A, tapping A's hotspot in B's Wi-Fi list fails with "Failed to enable hotspot" / "Failed to enable hotspot after 2 attempts". Once a third device (an Android tablet) connects to the same hotspot and brings it up, B connects immediately with no prompt. After that third device disconnects and the hotspot goes back to sleep, B fails again, exactly as before. The cycle repeats every time.
- On A, turn on Personal Hotspot. Make sure no device is connected, then wait about 90 seconds so the hotspot AP goes to sleep.
- On B, open Settings > Wi-Fi and tap A's hotspot.
- After a few seconds B shows "Failed to enable hotspot" / "Failed to enable hotspot after 2 attempts".
- Tap OK and try again — same result.
- Connect an Android tablet to A's hotspot with the Wi-Fi password. It works normally and gets internet access.
- Without disconnecting the tablet, tap A's hotspot on B again. B connects immediately, no prompt, no error.
- Disconnect the tablet and wait for the hotspot to go back to sleep.
- Tap the hotspot on B again — the same error returns.
This is repeatable, and the result is fully determined by whether the hotspot AP is awake.
The same two devices worked on iOS 27.3 beta 1. B connected within 1-2 seconds with no error. A was updated to beta 2 on 2026-11-16, and the problem started right after.
B should be able to wake A's hotspot through Instant Hotspot and join it directly.
B's wake request is never honored. The hotspot only becomes joinable if something else brings the AP up first.
This rules out a credential, pairing, or saved-network issue on B. The hotspot itself is healthy — the Android tablet connects and browses normally. The failing piece is the Instant Hotspot wake path in iOS 27.3 beta 2 when the peer device runs an older build.
Feedback ID: FB25613861