macOS 27.2: external monitor on a USB-C to HDMI adapter flickers, shows as "12 inch Display" at 1280x720, all resolutions refused (empty EDID)

Since I updated from macOS 27.0.1 to 27.2 (26B123), my second monitor stopped working on a Mac mini M4 Pro.

It is a Dell SE2726HG on a USB-C to HDMI adapter. My LG on the built-in HDMI port still works.

Symptoms:

  • The Dell flickers. It disconnects and reconnects about once per second.
  • System Settings shows it as "Display", 12 inch, 1280x720 at 50 Hz.
  • Every resolution change is refused, also for the other monitor.
  • A restart, a replug, or a lower refresh rate on the other monitor does not help.

What the logs show:

  • macOS cannot read the monitor's EDID through the adapter. IOAVServiceCopyEDID returns 0xe00002c9 (internal error), and the framebuffer has an all-zero EDID.
  • Without an EDID, the kernel gives the display no display pipe: "AED: validate_or_set_ex: fb 2 rejecting request, exceeds full dual-pipe allocation (w 1280 vs 0 ...)" and "skipping display with null info".
  • In 47 minutes, the log had 379 hotplug "out" events.

Workaround (no extra hardware, no paid app):
I injected a normal 1920x1080 EDID at runtime with the private IOKit call IOAVServiceSetVirtualEDIDMode(service, 1, edid), then IODPDeviceSetUpdated(device, 1). The monitor then comes up with its correct name at 1920x1080, with zero disconnects. The override is lost on reboot, sleep, or replug, so a LaunchAgent re-applies it every 5 seconds when the EDID read fails. This is the same approach as these projects:

  • https://gist.github.com/danii1/99fa5f849a4d42807418259abfbf03d5
  • https://github.com/owomocha/macos-360hz-unlock
    BetterDisplay Pro can also apply a custom EDID.

I'm having a very similar issue.

Since macOS 27.2 (still on 27.2.1, build 26B131), an ASUS [ASUS model] monitor connected over HDMI is detected without EDID. macOS shows it as a generic "Display" at 1280x720 @ 50Hz, offers no other resolutions, and does not keep display arrangement changes. The monitor has worked with this Mac before.

Hardware: MacBook Pro, Apple M4 Max (Mac16,6)

Steps to reproduce:

  1. Connect the ASUS monitor to the built-in HDMI port, or through a USB-C to HDMI adapter.
  2. Open System Settings > Displays.

Expected: Monitor shows its name and native resolution (2560x1440).
Actual: Shows as "Display" at 1280x720 @ 50Hz. Arrangement is not saved across reconnects.

Diagnostics:

  • ioreg: EDID UUID = 00000000-0000-0000-0000-000000000000, ManufacturerID = 00-00-00, ProductID = 0
  • corercd (CEC): vendorID=000000, modelName= (empty)
  • Kernel log after each hotplug:
    AED: mapping_get_output: skipping display with null info
    AED: validate_or_set_ex: fb 0 rejecting request, exceeds full dual-pipe allocation (w 1280 vs 0, bw 230 vs 0)
    AED validate-ex: returning 0xe00002c7, setOutput count=0

Ruled out:

  • Same monitor works correctly on a Windows laptop (correct name and native resolution), so the monitor's EDID is valid.
  • Swapped HDMI cable: no change.
  • Built-in HDMI port and USB-C to HDMI adapter both fail.
  • Safe Mode: same behavior.
  • Removed com.apple.windowserver.displays plists (user and system) and rebooted: no change.
  • Updated 27.2 to 27.2.1: no change.
  • No third-party display software or system extensions installed.

Hello @sankalpsharma, @tpheiff

Have you filed a feedback report? When you file a feedback report, it gets routed directly to the appropriate relevant engineering teams for them to take a look – make sure a project that reproduces the issue is included, with steps to demonstrate. For troubleshooting purposes, does this happen with only this particular monitor, or have you seen the same with multiple? Include this information in your report.

Thank you,
 Travis

im having a similar issue. After updating to macOS 27.2.1 (26B131), my external monitor is no longer identified correctly and I cannot change its resolution or arrangement. This worked correctly before the update with the same monitor, cable and adapter.

Hardware:

MacBook Pro 14-inch, [chip, e.g. M4 Pro]External monitor: [make and model]Connection: [e.g. USB-C to HDMI adapter, brand/model if known]
Steps to reproduce:

Connect the external monitor.Open System Settings > Displays.Drag the external display above the built-in display in Arrange, or choose a different resolution for it.
Expected result:
The display is identified by its model name, shows its full list of resolutions, and arrangement and resolution changes are applied and saved.

Actual result:

The display is identified as a generic “12 inch external screen” with no serial number.It defaults to 1280x720 at 50Hz and only offers TV-style modes (720x480, 720x576, 1280x720, 1920x1080).Arrangement and resolution changes do nothing. The display stays to the left of the built-in display at 1280x720.Changes made from the command line (displayplacer) are also silently ignored, so this appears to be at the system level, not a System Settings UI issue.[If tested: The same monitor works correctly on the built-in HDMI port.]
Troubleshooting already tried:

Installed the latest update (27.2.1)Removed com.apple.windowserver display preference files and restartedToggled “Displays have separate Spaces” and logged outTested in Safe Mode / a new user account [delete if not done]
This looks similar to the 27.2 known issue 188643179 (display arrangement not restored) and to reports of empty EDID over USB-C to HDMI adapters on 27.2.